Eaton 1-Pole Surface Isolator Switch -, IP65, 0A, 13 kW
- RS 제품 번호:
- 393-9692
- 제조사 부품 번호:
- 78634628 T3-1-8200/I2H/SVB/K-CI-K1/2(RS393-9692)
- 제조업체:
- Eaton
Subtotal (1 unit)*
₩135,427.50
재고있음
- 추가로 2026년 5월 25일 부터 6 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩135,427.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 393-9692
- 제조사 부품 번호:
- 78634628 T3-1-8200/I2H/SVB/K-CI-K1/2(RS393-9692)
- 제조업체:
- Eaton
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Eaton | |
| Product Type | Isolator Switch | |
| Number of Poles | 1 | |
| Mount Type | Surface | |
| IP Rating | IP65 | |
| Electrical Phase | 1 | |
| Handle Colour | Red | |
| Switching Current | 0A | |
| Series | T3-1 | |
| Terminal Type | Screw | |
| Auxiliary Contacts Available | No | |
| Switching Power | 13kW | |
| Minimum Operating Temperature | -25°C | |
| Padlock Compatibility | No | |
| Maximum Operating Temperature | 40°C | |
| Depth | 80mm | |
| Hazardous Area Certification | NO | |
| Standards/Approvals | UL, CSA, IEC | |
| Width | 100mm | |
| Length | 180mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 Eaton | ||
Product Type Isolator Switch | ||
Number of Poles 1 | ||
Mount Type Surface | ||
IP Rating IP65 | ||
Electrical Phase 1 | ||
Handle Colour Red | ||
Switching Current 0A | ||
Series T3-1 | ||
Terminal Type Screw | ||
Auxiliary Contacts Available No | ||
Switching Power 13kW | ||
Minimum Operating Temperature -25°C | ||
Padlock Compatibility No | ||
Maximum Operating Temperature 40°C | ||
Depth 80mm | ||
Hazardous Area Certification NO | ||
Standards/Approvals UL, CSA, IEC | ||
Width 100mm | ||
Length 180mm | ||
제외
- COO (Country of Origin):
- GB
Eaton Enclosed Isolator Switch
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.
Features & Benefits
• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions: used as a main switch, maintenance switch or manual override switch
• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Built-in earth commoning block
• Lockable in the 0/OFF position, with up to three padlocks
• Totally insulated
• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.
Note
Switch power/capacity refers to AC23A use at 380-440V
관련된 링크들
- Eaton 2-Pole Surface Isolator Switch -, IP65, 32A, 13 kW
- Eaton 6-Pole Surface Isolator Switch -, IP65, 260A, 13 kW
- Eaton 1-Pole Surface Isolator Switch -, IP65, 20A, 5.5 kW
- Eaton 1-Pole Surface Isolator Switch -, IP65, 260A, 13 kW
- Eaton 4-Pole Isolator Switch -, IP65, 0A, 22 kW
- Eaton 1-Pole Screw Isolator Switch -, IP65, 100A, 30 kW
- Eaton 3-Pole Surface Isolator Switch -, IP65, 25A, 22 kW
- Eaton 2-Pole Surface Isolator Switch -, IP65, 25A, 22 kW