Omron K7GE-MGMA Insulation Resistance Tester
- RS 제품 번호:
- 239-8224
- 제조사 부품 번호:
- K7GE-MGMD
- 제조업체:
- Omron
Subtotal (1 unit)*
₩2,059,577.60
일시적 품절
- 2026년 6월 24일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩2,059,577.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 239-8224
- 제조사 부품 번호:
- K7GE-MGMD
- 제조업체:
- Omron
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Omron | |
| Product Type | Insulation Tester | |
| Model Number | K7GE-MGMA | |
| Tester Type | Insulation Resistance Tester | |
| Display Type | LCD | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 65°C | |
| Standards/Approvals | EN/IEC 61326-1, CAN/CSA-C22.2 No.61010-1, CE, UL 61010-1 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Omron | ||
Product Type Insulation Tester | ||
Model Number K7GE-MGMA | ||
Tester Type Insulation Resistance Tester | ||
Display Type LCD | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 65°C | ||
Standards/Approvals EN/IEC 61326-1, CAN/CSA-C22.2 No.61010-1, CE, UL 61010-1 | ||
- COO (Country of Origin):
- JP
The Omron insulation resistance monitoring device is used for 3-phase & servo motors, pumps and heaters. It has power supply voltage from 24 VAC/VDC and transistor control output. This device automatically measures the insulation resistance of a load and supports trend monitoring. Periodic inspections by manpower may cause a unexpected machine stoppage due to a decrease in insulation resistance of equipment before the next inspection. It provides automatic monitoring of the insulation resistance of each load and allows planned maintenance. This device measures the insulation resistance by the same detection principle (megger method) as a megohmmeter. To measure the insulation resistance it is necessary to combine one main unit with at least one probe unit. It constantly monitors the voltage applied to the device targeted for measurement, and automatically stops measurement if the target device power is turned ON after measurement has started. It belongs to RS-485/Modbus/RTU protocols.
Measures insulation resistance automatically when a trigger signal is input
Highly reproducible measurement with experienced maintenance know-how incorporated
Reduced risk of equipment failure due to measurement with fixed DC 50 V
Able to measure up to eight points simultaneously
High frequency of measurements to accurately identify equipment abnormalities
Reduced equipment failure risk
Remote data assessment via network connection
Easy measurement data collection and trend monitoring by using a dedicated tool
Push-in Plus terminal block type
관련된 링크들
- Omron K7GE-MGMA Insulation Resistance Tester
- Omron K7GE-MG1 Insulation Tester Probe Probe Unit, For Use With K7GE-MGM
- Kyoritsu K3132A Insulation Resistance Tester, 250 V Min, 1000 V Max
- Megger 1008-022 Insulation Tester HV Test Lead Set Lead, For Use With Insulation Resistance Testers
- Kyoritsu K6024PV Insulation Resistance Tester, 250 V Min, 1000 V Max, 2000 mΩ CAT IV
- Chauvin Arnoux CA 6549 Insulation Resistance Tester, 40 V Min, 5100 V Max, 10000 GΩ Cat I 2, Aurix
- Chauvin Arnoux CA 6545 Insulation Resistance Tester, 40 V Min, 5100 V Max, 10000 GΩ Aurix, Cat I 2
- Fluke 1555 Insulation Resistance Tester, 250V Min, 10000V Max, 2TΩ Max, CAT III 1000 V, CAT IV 600 V