Omron K7GE-MGMA Insulation Resistance Tester

모든 Insulation Testers 열람하기

Subtotal (1 unit)*

₩2,120,433.20

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 6월 25일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩2,120,433.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
239-8223
제조사 부품 번호:
K7GE-MGMA
제조업체:
Omron
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Omron

Model Number

K7GE-MGMA

Product Type

Insulation Tester

Tester Type

Insulation Resistance Tester

Display Type

LCD

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

65°C

Standards/Approvals

CE, EN/IEC 61326-1, CAN/CSA-C22.2 No.61010-1, UL 61010-1

COO (Country of Origin):
JP
The Omron insulation resistance monitoring device is used for 3-phase & servo motors, pumps and heaters. It has power supply voltage from 100 to 240 VAC and transistor control output. This device automatically measures the insulation resistance of a load and supports trend monitoring. Periodic inspections by manpower may cause a unexpected machine stoppage due to a decrease in insulation resistance of equipment before the next inspection. It provides automatic monitoring of the insulation resistance of each load and allows planned maintenance. This device measures the insulation resistance by the same detection principle (megger method) as a megohmmeter.

Measures insulation resistance automatically when a trigger signal is input

Highly reproducible measurement with experienced maintenance know-how incorporated

Reduced risk of equipment failure due to measurement with fixed DC 50 V

Able to measure up to eight points simultaneously

High frequency of measurements to accurately identify equipment abnormalities

Reduced equipment failure risk

Remote data assessment via network connection

Easy measurement data collection and trend monitoring by using a dedicated tool

Push-in Plus terminal block type

To measure the insulation resistance it is necessary to combine one main unit with at least one probe unit. It constantly monitors the voltage applied to the device targeted for measurement, and automatically stops measurement if the target device power is turned ON after measurement has started. It belongs to RS-485/Modbus/RTU protocols.

관련된 링크들