Digilent 410-328-35 Cmod A7 Artix-7 Module ADC1410 for DAC121S101

모든 FPGA Development Tools 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩173,693.20

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 1월 30일 부터 16 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩173,693.20
5 - 24₩168,485.60
25 +₩163,428.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
134-6483
Distrelec 제품 번호:
301-33-420
제조사 부품 번호:
410-328-35
제조업체:
Digilent
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Digilent

Product Type

Programmable Logic Development Kit

Kit Classification

Module

Programmable Logic Technology

FPGA

For Use With

DAC121S101

Featured Device

ADC1410

Kit Name

Cmod A7 Artix-7

Standards/Approvals

RoHS

Digilent Cmod Module


The Digilent Cmod module is a small, 48-pin DIP form factor board built around a Xilinx Artix 7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM, Quad SPI flash, and basic I/O devices. These components make it a formidable, albeit compact platform for digital logic circuits and MicroBlaze embedded softcore processor designs.

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to design even after the device is soldered into a PCB.

Features and Benefits


33280 logic cells in 5200 slices (each slice contains 4 x 6-input LUTs and 8 x flip-flops)

1800Kbit fast block RAM

5 x clock management tiles, each with a phase-locked loop (PLL)

90 x DSP slices

Internal clock speeds exceeding 450MHz

Onboard IS61WV5128BLL-10BLI 512KB SRAM

Onboard N25Q032A 4MB Quad-SPI flash memory

MicroUSB connector

Onboard FT2232HQ USB-UART bridge

2 x user LEDs

User RGB LED

2 x user pushbuttons

48-pin DIP connector with 44 x GPIO and 2 x analogue inputs

Standard Pmod 2 x 6-pin connector

Power supply is either from USB or external ranging between 3.3V and 5.5Vdc connected to DIP pins

Certifications


ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007

관련된 링크들