Digilent 410-300 GENESYS2 KINTEX-7 Development Board ADC1410 for DAC121S101

모든 FPGA Development Tools 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩1,687,112.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 1월 30일 부터 8 개 단위 배송
  • 추가로 2026년 2월 06일 부터 34 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩1,687,112.00
5 +₩1,636,502.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
134-6471
Distrelec 제품 번호:
300-44-262
제조사 부품 번호:
410-300
제조업체:
Digilent
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Digilent

Kit Classification

Development Board

Programmable Logic Technology

FPGA

Product Type

Plug-In Module

For Use With

DAC121S101

Featured Device

ADC1410

Kit Name

GENESYS2 KINTEX-7

Standards/Approvals

RoHS

Genesys 2 Kintex-7 FPGA Development Board


The Digilent Genesys 2 board is a digital circuit development platform based on the Kintex-7™ Field Programmable Gate Array (FPGA) from Xilinx. Genesys 2 is well suited for data and video processing applications. Genesys 2 is compatible with Vivado Design Suite as well as the ISE toolset, which includes ChipScope and EDK.

XC7K325T-2FFG900C FPGA Features


• 50950 logic slices each with 4 x 6-input LUTs and 8 x flip-flops

• Close to 16Mbits of fast block RAM

• 10 x clock management tiles, each with phase-locked loop (PLL)

• 840 x DSP slices

• Internal clock speeds exceeding 450MHz

• On-chip analogue-to-digital converter (XADC)

• Up to 10.3125Gbps gigabit transceivers

• 1800Mbps DDR3 data rate with 32-bit data width

• Commercial -2 speed grade

Genesys 2 Board Features


• On-board 2 x MT41J256M16HA-107 1GiB DDR3 SDRAM memory

• On-board S25FL256S 256Mbit Quad-SPI serial NOR Flash memory

• On-board ADAU1761 SigmaDSP stereo audio CODEC

• On-board FT2232R USB-UART bridge controller

• On-board RTL8211E-VL Ethernet PHY

• 0.91in 128 x 32pixel OLED display

• microSD card slot

• On-board USB-JTAG programming via microUSB connector

• JTAG 6-pin header

• RJ45 socket for 10/100/1000 Ethernet LAN

• USB-A OTG 2.0 socket

• USB-A Host MSD/HID socket

• HDMI display (source) socket

• HDMI display (sink) socket

• DisplayPort (source) mDP socket

• DisplayPort (sink) mDP socket

• VGA display (16-bit colour) DE15 socket

• HPC FMC 400-pin connector with 10 x GTX lanes

• 4 x 3.5mm jack sockets for Microphone, Line In, Line Out, Headphones

• 5 x 12-pin Pmod™ expansion connectors

• +12Vdc power supply barrel jack socket

• Cooling fan for FPGA device

• Power slide-switch

• Reset pushbutton

• Programming pushbutton

• 8 x User slide-switches

• 5 x User pushbuttons

• Power LED

• Programming Done LED

• Ethernet Activity LEDs

• 8 x User LEDs

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Supplied with

USB-A to Micro-B cable

관련된 링크들