3M SCOTCH 4656 DIE Scotch Transparent Foam Tape, 25mm x 12 m, 0.6 mm Thick

모든 Foam Tapes 열람하기

Subtotal (1 Box of 1000 units)*

₩422,865.30

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 5월 04일 부터 6 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Box(es)
Per Box
한팩당*
1 +₩422,865.30₩423.15

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
285-6282
Distrelec 제품 번호:
180-81-783
제조사 부품 번호:
7000070515
제조업체:
3M
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

3M

Width

25mm

Product Type

Foam Tape

Thickness

0.6mm

Length

12m

Backing Material

Acrylic Foam

Colour

Transparent

Single/Double Sided

Double Sided

Trade Name

Scotch

Adhesive Material

Acrylate

Minimum Operating Temperature

-30°C

Standards/Approvals

No

Maximum Operating Temperature

40°C

제외

3M Foam Tape, 25mm Width, 0.6mm Thickness - 7000070515


This foam tape is a transparent, double-sided acrylic foam adhesive designed for secure bonding and removable mounting in industrial settings. It provides a low-profile attachment method for trims, panels and components where a discreet fix is required, and performs across a moderate temperature range suitable for many indoor and sheltered outdoor installations.

Features & Benefits


• Acrylate adhesive offers high-strength holding capacity
• Acrylic foam backing provides conformability to uneven surfaces
• Operational range from -30°C to 40°C enables temperature resilience
• Thin 0.6mm profile minimises gap for glazing and narrow joints
• 25mm width supports linear, edge-to-edge mounting applications
• 12 m length supplies extended run for continuous bonding tasks

**Applications**


• Suitable for fixing decorative metal trim to frames in automation cabinets
• Ideal for bonding control-panel overlays and nameplates in electrical enclosures
• Used with sensor housings where a slim adhesive Interface is required
• Can be used for attaching fascia panels in mechanical assemblies
• Used for mounting lightweight brackets and tags in production lines

How does the product cope with temperature fluctuations on site?


It maintains adhesive performance between -30°C and 40°C, allowing consistent adhesion within that range without specification changes.

Can it be removed without leaving marks on substrates?


The adhesive is formulated to allow removal with reduced residue on many surfaces when peeled carefully rather than torn.

What backing behaviour should I expect during application?


The acrylic foam backing compresses slightly to accommodate surface irregularities, improving contact and load distribution along the joint.

Is this suitable for precision glazing or thin-gap assemblies?


Its 0.6mm thickness provides a low-profile solution appropriate for narrow-gap mounting and glazing edge bonding.

관련된 링크들