Festo 1/2 in G FRL, Manual Drain, 40 μm Filtration Size Integrated Pressure Gauge, 530230

본 제품군 열람하기

Subtotal (1 unit)*

₩294,400.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 8월 24일 부터 12 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩294,400.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
202-3038
제조사 부품 번호:
MSB6-1/2-FRC1:J5M1
제조업체:
Festo
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Festo

Product Type

FRL

Port Size

1/2 in G

Integrated Pressure Gauge

Yes

Maximum Flow Rate

4800L/min

Drain Type

Manual

Series

MSB 6

Filtration Size

40μm

Pressure Gauge Port Size

1/2 in G

Maximum Operating Pressure

20 bar

Maximum Operating Temperature

60°C

Standards/Approvals

RoHS

Bowl Material

Plastic

Pressure Setting Range

0.03 to 0.7 MPa

Model Number

530230

Pressure Gauge Port Thread Standard

G

COO (Country of Origin):
HU

Festo Manual Drain, G 1/2, 40 μm Filtration Size - MSB6 Series - MSB6-1/2-FRC1:J5M1


Use this filter, regulator and lubricator from Festo to assist in the uncomplicated preparation of compressed air. It features a reinforced membrane to enhance flow rate and extend the unit's service life. This membrane also reduces pressure drop and regulation failure. There's a built-in sensor to efficiently convert pressure to an electrical signal. The unit's compact design saves on space while maintaining high flow rates. Smart mount technology allows for a leak-free connection with other components from the Festo MS range. It's suitable to use in automated factory applications.

• Manual drain type

• Filtration size of 40 μm

• Port connection of G 1/2

• Operating pressure of 1.5 bar to 20 bar

• Rotary knob with integrated lock

• Assembly position of vertical +/- 5°

• Proportional standard mist lubricator design structure

• Controller function of output pressure constant with initial pressure compensation, secondary exhaust and return flow

Range Information


• The Festo MS series of service units offers individual configuration in a modular system, so you can create a compressed air preparation system to suit your needs

• With filters, regulators and lubricators available in four sizes, the MS range covers all possible flow-rate requirements

• All MS components have integrated safety valves

The Festo one-way flow control function for supply air with swivel joint has a threaded mounting type and can be assembled in any position. Here, threaded plug is made of brass material with a zinc die-casting for swivel fitting. Its pneumatic connection

Ambient temperature -10 to 60 °C

Slotted head screw adjusting element

관련된 링크들