Vent-Axia SDX100 Euro Rectangular Duct Fan, 212 m³/h, 38 dB, Weather Tight Fit, Four Sealing Rings, Duct Size 100 mm

The in-line fan casing is constructed from pressed steel and incorporates an aerodynamically designed airflow guide vane, ensuring maximum performance from the unit whilst maintaining minimum noise levels. All models are supplied with a simple mounting foot for ease of installation.

The SDX range is available in three model sizes: 100, 150 and 315mm diameter as standard performance. The range provides a performance up to 0.372m³/s with a maximum pressure development of 500 Pa.The SDX range is suitable for the extract of clean air only. It is not suitable for extracting or transporting grinding dust, soot, explosive or other aggressive gases etc.

The impellers are aerodynamically designed centrifugal backward curved type, manufactured by injection moulding of a polypropylene resin. The motor and impeller is factory matched, statically and dynamically balanced in two planes to ISO 1940, Grade G 6.3.

All units are fitted with motors protected to IP44, insulation Class B and are suitable for temperatures ranging from -25°C to +60°C with humidity levels of up to 95% RH ensuring reliable operation. All sizes are for a 220V/1/50Hz electrical supply and incorporate a manual reset thermal protection device.

Choice:

884-0988: Euro Series SDX 100 (100mm)

884-0982: Euro Series SDX 150 (150mm)

884-0991: Euro Series SDX 315 (315mm)

Motor Insulation Class B, protected to IP44

Operating Temperatures from -25°C up to +60°C

All units suitable for speed control

Quality Assurance to BS EN ISO 9001:1994

Performance tested to BS848 Part 1 1980