Vent-Axia Solo Plus P Solo Plus Rectangular Wall Mount Extractor Fan, 80 m³/h, 11.5 dBA, Duct Size 100 mm

모든 Extractor Fans 열람하기

Subtotal (1 unit)*

₩332,709.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩332,709.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
884-1004
제조사 부품 번호:
Solo Plus P
제조업체:
Vent-Axia
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Vent-Axia

Fan Type

Extractor

Product Type

Extractor Fan

Air Flow

80m³/h

Noise Level

11.5dBA

Mount Type

Wall Mount

Colour

White

Power Consumption

171W

Installation Depth

161mm

Face Height

263mm

Face Width

224mm

IP Rating

IPX4

Standards/Approvals

RoHS

Duct Size

100 mm

Supply Voltage

230V ac

Series

Solo Plus

Configuration

Rectangular

COO (Country of Origin):
GB

Vent-Axia Solo® Plus Centrifugal Bathroom/Toilet Fan


The Solo Plus range from Vent-Axia has been specially designed for through the wall and ducted applications, suitable for internal bathrooms, toilets and other small rooms. Finished in white, the Solo Plus can be flush or surface mounted, with a 100mm circular spigot for rear entry or connecting to a vertical ducting system. The spigot can also be adjusted for side ways exhaust enabling recessed ceiling installations within limited ceiling voids. The powerful centrifugal impeller allows for installations with longer duct runs using 100mm ducting, whilst still achieving 15 l/s as required by Document F of the current Building Regulations.

Continuous running products, such as the Solo Plus installed in all wet areas of a dwelling are classed as a wholehouse ventilation system and therefore, only needs to move the amount of air as laid down in table 1.1b of Document F.

The Solo Plus has a choice of two boost/override motor speeds set at installation, medium (17l/s) or high (22l/s), with an optional constant trickle speed (9l/s), also selectable at installation except in the P model. Depending on the model, the fan will switch from trickle (if selected) to boost (medium or high) via the pullcord/ light switch/humidity sensor/PIR.

Choice:

884-1004: Solo Plus P with pullcord

884-1008: Solo Plus T with timer

884-1017: Solo Plus HT with humidity and timer

Filterless as standard - innovative impeller design means no need for a filter

Meets current Building Regulations Approved Documents F & L requirements for domestic bathrooms and toilets

IPX4 rated

Flush or surface mountable

Adjustable rear or side exit spigot

Extremely low sound levels

Suitable for wall, ceiling and panel mounting

Wall / Ceiling Extractor Fans


관련된 링크들