제조사부품번호

Festo ELGS, 8083471 Electrical Linear Actuator, 0.25m/s, 200 mm

RS 제품 번호:: 203-9795
Distrelec 제품 번호:: 301-86-888
제조사 부품 번호:: ELGS-BS-KF-45-200-10P-ST-M-H1-PLK-AA
제조업체:: Festo

Festo ELGS, 8083471 Electrical Linear Actuator, 0.25m/s, 200 mm

Subtotal (1 unit)*

₩2,581,500.00

제조사가 재고 비축중

2026년 9월 28일 부터 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩2,581,500.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 203-9795
Distrelec 제품 번호:: 301-86-888
제조사 부품 번호:: ELGS-BS-KF-45-200-10P-ST-M-H1-PLK-AA
제조업체:: Festo

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Festo
	Product Type	Electrical Linear Actuator
	Stroke Length	200mm
	Maximum Speed	0.25m/s
	Series	ELGS
	Motor Technology	Stepper Motor
	Duty Cycle	100%
	IP Rating	IP40
	Guide Type	Ball Bearing
	Maximum Operating Temperature	50°C
	Standards/Approvals	RoHS
	Model Number	8083471

	모두 선택
	브랜드 Festo
	Product Type Electrical Linear Actuator
	Stroke Length 200mm
	Maximum Speed 0.25m/s
	Series ELGS
	Motor Technology Stepper Motor
	Duty Cycle 100%
	IP Rating IP40
	Guide Type Ball Bearing
	Maximum Operating Temperature 50°C
	Standards/Approvals RoHS
	Model Number 8083471

COO (Country of Origin):: DE

Festo ELGS Series Electrical Linear Actuator, 200mm Stroke Length, 0.25m/s Maximum Speed - ELGS-BS-KF-45-200-10P-ST-M-H1-PLK-AA, Numeric Part Number:8083471

This electrical linear actuator provides electrically driven linear motion for automation and mechanical systems, using a precision screw-driven mechanism coupled to an integrated stepper motor. It is designed for continuous operation in industrial environments where controlled, repeatable linear positioning is required. Protection against dust and incidental contact is provided to suit typical shop-floor conditions.

Features and Benefits:

• 100% duty cycle ensures uninterrupted continuous operation
• Ball bearing guide delivers smooth, low-friction linear travel
• Stepper motor enables precise positional control and repeatability
• 200mm stroke length supports extended travel tasks
• Maximum speed 0.25m/s facilitates moderate velocity motion
• Rated for operation up to 50°C for elevated ambient use

Applications

• Suitable for pick-and-place stages in automated assembly
• Ideal for panel positioning in control cabinets
• Used for linear indexing in inspection systems
• Can be used for feed mechanisms in electronic assembly
• Suitable for actuator tasks in laboratory automation

What kind of motor control is required for accurate positioning?

A stepper motor driver with microstepping and current limiting will provide fine resolution and stable holding torque for repeatable moves.

How should the unit be cooled if installed in warm enclosures?

Ensure adequate ventilation or forced-air circulation to maintain ambient temperatures below the 50°C maximum operating limit.

What mounting considerations support long service life?

Rigid mounting to a flat reference surface and alignment of the load path with the bearing guides minimises side loads and wear on the ball-bearing guide system.

Are there special considerations for speed versus torque?

Increasing speed toward the 0.25m/s maximum will reduce available dynamic force

select motor drive current and microstepping to match required acceleration and load.