Fluke 1625 CAT II 300V

모든 Earth Testers 열람하기

Subtotal (1 unit)*

₩8,594,438.80

Add to Basket
수량 선택 또는 입력
제한된 재고
  • 5 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩8,594,438.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
798-3974
Distrelec 제품 번호:
110-79-081
제조사 부품 번호:
FLUKE-1625-2 KIT
제조업체:
Fluke
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Fluke

Measurement Type

Earth Resistance

Battery Life

6000h

Power Source

Battery

Includes

Cable Reel, User Manual, Batteries, Carrying Case

Model Number

1625

Safety Category Level

CAT II

Safety Category Voltage

300V

제외

COO (Country of Origin):
RO

Fluke Earth Tester Kit, ±5 % rdg Accuracy, Battery Life 6000h - FLUKE-1625-2 KIT


This earth tester kit is a battery‑powered instrument for measuring earth resistance and soil resistivity in outdoor and indoor environments. It supports multiple test methods including fall‑of‑potential, selective clamp testing and stakeless clamp‑based loop measurements, and stores test records for later transfer via USB.

Features & Benefits


• ±5% accuracy Plus 5 digits for precise readings
• AFC and R* modes reduce interference and reflect 55Hz impedance
• Internal memory holds up to 1500 records for data logging
• Stakeless measurement with two clamps avoids stake placement
• IP56 protection permits use in wet and dusty conditions
• Battery operation delivers up to 6000 h life with AA cells

Applications


• Suitable for field service fault‑to‑earth verification in power systems
• Ideal for industrial maintenance earth resistance surveys
• Used for soil earth resistance measurement in telecom sites
• Can be used for selective rod testing without disconnection
• Used with clamps for loop resistance checks inside substations

How is data transferred from the instrument for reporting?


Stored records are exported through a USB port for PC download and analysis.

What safety and electrical limits should I observe during testing?


Measurement is inhibited if external voltages exceed 24V and the instrument withstands misuse up to 250 Vrms between sockets.

Which battery configuration is required and what is typical lifespan?


Six AA alkaline cells power the unit with typical measurement counts up to 6000 h depending on load conditions.

How does the instrument handle noisy environments or mains interference?


Noise rejection is specified up to 120 dB and automatic frequency selection identifies interference and selects a measurement frequency.

Are there restrictions on clamp use for stakeless testing?


Stakeless loop measurement requires the recommended current clamps and adherence to minimum spacing for valid results.

Supplied with

6 x AA LR6 batteries, 6 x test leads, 4 x earth ground stakes, 3 x cable reels with wire (2 x 25 m, 1 x 50 m), 2 x clamps (one inducing, one sensing), users manual, carrying case.

관련된 링크들