Recom RFB DC/DC Converter, 5V dc/ 200 mA, 5.5V dc Input, 4.5V Input 1 W, Through Hole, 85 °C Max Temp -40 °C Min Temp,

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 DC-DC Converters 열람하기
대량 구매 할인 기용 가능
View bulk pricing options

Subtotal (1 unit)*

₩3,240.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 18 개 단위 배송 준비 완료
  • 추가로 2026년 9월 04일 부터 50 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량
한팩당
1 - 6₩3,240.00
7 - 12₩3,140.00
13 +₩3,040.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

포장 옵션
RS 제품 번호:
185-5539
제조사 부품 번호:
RFB-0505S
제조업체:
Recom
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Recom

Output Voltage 1

5V dc

Product Type

DC/DC Converter

Maximum Input Voltage

5.5V dc

Minimum Input Voltage

4.5V

Output Current 1

200mA

Mount Type

Through Hole

Input Ratio

1:1

Number of Outputs

1

MTBF

13200000h

Number of Pins

6

Isolation Voltage

1kV dc

Package Type

SIP-7

Maximum Output Power

1W

Depth

10.2mm

Standards/Approvals

No

Width

6mm

Length

19.6mm

Series

RFB

Efficiency

80%

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

COO (Country of Origin):
TW

RECOM DC-DC Converter, SIP-7 Package, 80% Conversion Efficiency - RFB Series - RFB-0505S


Clamp down on unstable power supplies with this DC-DC converter from RECOM. It adjusts voltages between 4.5 and 5.5V DC to a 5V DC output to make sure your equipment gets the input it needs. Thanks to an output accuracy of ±2%, you can be sure things will tick along reliably. Speedy through-hole mounting lets you slot the unit onto a board without hassle. There's no need to worry about damage caused by electrical faults, as the device's built-in short-circuit protection shuts issues down as soon as they pop up.

• Standard pin layout for easy installation

• Typical ripple voltage of 55mV to dial down disruption from electrical noise

• Switches 80% of input loads, making for energy-efficient conversion

• Measures just 19.6 (L) x 6 (W) x 10.2mm (D) to slip into busy setups

• Plastic and resin insulation cuts the risk of electric shocks

Applications


• Portable cameras

• Manufacturing industry

• Power distribution systems

The RFB DC/DC converter is typically used in cost sensitive general purpose power isolation and voltage matching applications. Despite its low cost, it is a fully specified converter with 1kVDC isolation, industrial operating temperature range of -40°C to +85°C without derating and UL/EN certifications.

Can I use this converter in extreme temperatures?


Low cost 1W converter

1:1 input voltage range

SIP7 package

1kVDC isolation

Efficiency up to 80%

UL60950-1, CAN/CSA C22.2 No. 60950-1 certified

Yes, this product handles operating temperatures between -40°C and +85°C, so it's a safe bet for tough industrial conditions.

관련된 링크들