Subtotal (1 unit)*
₩174,200.00
일시적 품절
- 2026년 8월 17일 부터 5 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩174,200.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 240-0765
- 제조사 부품 번호:
- 622NW
- 제조업체:
- Erem
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Erem | |
| Product Type | Side cutter | |
| Sub Type | Cable Cutter | |
| Overall Length | 110mm | |
| Jaw Length | 17mm | |
| VDE/1000V Approved | No | |
| Application | Microelectronic | |
| Height Safe | Yes | |
| Jaw Material | High Grade Tool Steel | |
| ESD Safe | Yes | |
| Material Cut | Lead | |
| Standards/Approvals | RoHS | |
| Maximum Cutting Capacity | 1.2mm | |
| Cut Type | Flush | |
| 모두 선택 | ||
|---|---|---|
브랜드 Erem | ||
Product Type Side cutter | ||
Sub Type Cable Cutter | ||
Overall Length 110mm | ||
Jaw Length 17mm | ||
VDE/1000V Approved No | ||
Application Microelectronic | ||
Height Safe Yes | ||
Jaw Material High Grade Tool Steel | ||
ESD Safe Yes | ||
Material Cut Lead | ||
Standards/Approvals RoHS | ||
Maximum Cutting Capacity 1.2mm | ||
Cut Type Flush | ||
Weller Side cutter, 110mm Overall Length, 1.2mm Maximum Cutting Capacity - 622NW
This side cutter is a Compact hand tool designed for precision cutting in microelectronic work. It combines electrostatic discharge protection with a flush-cutting geometry to remove small conductors and component leads on delicate assemblies. The tool is suited to environments where ESD safety and fine, controlled cuts are required.
Features and Benefits:
• ESD-safe construction reduces risk of static damage to components
• High-grade tool steel jaws maintain sharpness for repeated use
• Flush-cutting action delivers near-level trims on component leads
• 17mm jaw length accesses confined soldered areas
• Maximum cutting capacity of 1.2mm handles common wire sizes
• High-grade tool steel jaws maintain sharpness for repeated use
• Flush-cutting action delivers near-level trims on component leads
• 17mm jaw length accesses confined soldered areas
• Maximum cutting capacity of 1.2mm handles common wire sizes
Applications
• Suitable for trimming component leads on PCBs
• Ideal for cable and lead removal in microelectronic assembly
• Used for precision wire cutting in electronics maintenance
• Can be used for fine cable work in automation equipment
• Ideal for cable and lead removal in microelectronic assembly
• Used for precision wire cutting in electronics maintenance
• Can be used for fine cable work in automation equipment
Is the tool rated for live-voltage work up to 1000 V?
No, it is not approved for 1000V DC applications and should not be used for live-voltage insulation safety.
What materials is it intended to cut?
It is designed to cut soft conductors such as lead and small copper wires up to its stated cutting capacity.
Does the tool conform to any environmental or material standards?
It meets RoHS requirements for restricted substances in electrical and electronic equipment.
How long is the tool overall and how does that affect access?
The overall length is 110 mm, providing a Compact profile for work in tight assemblies.
Is this suitable for general electrical installation where insulation stripping is needed?
The cutter is optimised for precision microelectronic tasks and flush cutting rather than insulation stripping.
관련된 링크들
- Erem 622 ESD ESD Safe Flush Side cutter
- Erem 522 ESD ESD Safe Flush Side cutter
- Erem 512 ESD ESD Safe Semi-Flush Side cutter
- Erem 612 ESD ESD Safe Semi-Flush Side cutter
- Erem Flush ESD Safe Side cutter
- Erem 676 ESD Flush ESD Safe Side Cutter
- Erem 2476 ESD Flush ESD Safe Side Cutter
- Erem 577 ESD ESD Safe Flush Side cutter