RS PRO Crimp Tool Crimp Tool for Bootlace Ferrule

모든 Crimp Tools 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩192,775.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 3월 23일 부터 35 개 단위 배송
  • 추가로 2026년 4월 10일 부터 20 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩192,775.20
5 - 24₩173,505.20
25 +₩142,804.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
399-2031
Distrelec 제품 번호:
304-03-209
제조업체:
RS PRO
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

RS PRO

Sub Type

Crimp Tool

Product Type

Crimp Tool

For Use With

Bootlace Ferrule

Height Safe

No

Overall Length

197mm

Standards/Approvals

No

Minimum Wire Size mm²

0.5

Minimum Wire Size AWG

22

Maximum Wire Size AWG

10

Maximum Wire Size mm²

6

제외

COO (Country of Origin):
SE

RS PRO Ratchet Crimping Tool


From RS PRO a durable, reliable and easy to use hand operated crimping tool made from high-quality hardened alloy steel. This hand tool consists of two handles with a non-slip ergonomic design for comfortable use, a ratchet mechanism, and a die assembly. This tool is front end feeding and creates a square crimp.

Ratchet Mechanism


The ratchet is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the dies are bottomed. The handles cannot be opened until a full crimping cycle is achieved therefore preventing partial crimps. Once the cycle is complete the handles re-open. The ratchet also enables the operator to repeatedly produce consistent, high-quality crimps

This hand crimp tool also features a ratchet release trigger which, when pressed, releases the tool handle in the event of obstructions or miscrimps

Adjustable Crimp Force


This hand crimping tool features a cam that is used to adjust the crimping force. The cam locking bolt and washer are removed using an Allen key and cam is simply turned to either loosen or tighten the tool. Once the required setting is selected the cam washer and bolt are locked back into place

Features and Benefits:


• Durable and easy to use

• Made from high-quality hardened alloy steel

• Ratchet mechanism ensures that full crimp cycle is achieved

• Ratchet release mechanism

• Adjustable crimping force

• Ergonomically designed, non-slip handles for comfortable use

• Life span of 50000 cycles

Importance of a High Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage

FAQS


What Terminals can this Crimping Tool be used with?

This hand crimping tool is designed for crimping bootlace ferrules with a wire size range of 0.5 sq mm to 6 sq mm.

관련된 링크들