RS PRO RZR Crimp Tool Non-Releasable for Wire End Sleeves

모든 Crimp Tools 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩77,023.60

Add to Basket
수량 선택 또는 입력
재고있음
  • 9 개 단위 배송 준비 완료
  • 추가로 2026년 3월 26일 부터 90 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩77,023.60
5 - 24₩69,315.60
25 +₩57,039.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
779-554
제조업체:
RS PRO
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

RS PRO

Product Type

Crimp Tool

Sub Type

Non-Releasable

For Use With

Wire End Sleeves

Height Safe

No

Series

RZR

Overall Length

240mm

Adjustable Ratchet

Yes

Standards/Approvals

VDE 1000V, CSA TEW, 94V-2, European Harmonised Standards H05V-K and H07V-K, UL style 1015, UL Nylon 66, to EN 60454-3-1 Type 2, BS6231, 1028 or 1283

Maximum Wire Size mm²

16

Minimum Wire Size mm²

0.5

제외

COO (Country of Origin):
GB

RS Pro Crimp Tool - Bootlace Ferrules


RS Pro crimp tool, designed for crimping bootlace ferrules. This professional tool offers wire range size of 0.5 16 mm2 with clear identifying marks on the head heads of the tool. A plier shape design and superb comfort in both hands deliver the perfect crimp every time.

Features and Benefits


• Supports a wire size of 0.5 to 16 mm²

• Suitable for crimping bootlace ferrules

• Ensures integrity the connector termination

• The indents are clearly marked with the different wire size ranges

Typical Applications


• Maintenance & repair

• Electrical Installations

• Computer Interfacing

• Cable assemblies

FAQ:

How easy are they to use?

They are very easy to use, choose the male or female pin for application, insert the wire into the pin then open the crimp tool, insert into the hole of the indent crimper and squeeze until the cycle finishes.

How do you maintain the product?

• Movable parts should be regularly lubricated.

• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

관련된 링크들