제조사부품번호

Knipex Crimp Tool for Wire Ferrules

RS 제품 번호:: 336-8179
Distrelec 제품 번호:: 180-54-634
제조사 부품 번호:: 97 53 04
제조업체:: Knipex

Subtotal (1 unit)*

₩440,780.00

추가로 2026년 9월 28일 부터 289 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩440,780.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 336-8179
Distrelec 제품 번호:: 180-54-634
제조사 부품 번호:: 97 53 04
제조업체:: Knipex

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Knipex
	Product Type	Crimp Tool
	For Use With	Wire Ferrules
	Height Safe	No
	Overall Length	180mm
	Maximum Wire Size AWG	6AWG
	Minimum Wire Size mm²	0.08
	Minimum Wire Size AWG	28AWG
	Maximum Wire Size mm²	16

	모두 선택
	브랜드 Knipex
	Product Type Crimp Tool
	For Use With Wire Ferrules
	Height Safe No
	Overall Length 180mm
	Maximum Wire Size AWG 6AWG
	Minimum Wire Size mm² 0.08
	Minimum Wire Size AWG 28AWG
	Maximum Wire Size mm² 16

97 53 04 Datasheet

COO (Country of Origin):: DE

Automatic crimping pliers for wire end ferrules from 0.08 to 16mm² with side access

This self-adjusting crimping tool is designed to crimp wire end ferrules onto stripped multi-stranded wires, with a size range of 0.08 to 10mm² + 16mm² (with the rotation of the side adjustment wheel and thus increase the crimping capacity). The gear ratio of this crimping tool has been well designed and it is therefore easy to use, offering a comfortable grip and allowing the user to crimp easily with a perfect result. Crimping can be easily achieved, leaving a square profile on the end sleeves (cable ends).

Features and benefits

- Reduced handle opening

- For crimping cable end sleeves according to DIN 46228 Part 1 + 4 from 0.08 to 16 mm² - AWG 28 to 5

- Automatic adjustment to the desired ferrule size

- Constantly high crimping quality thanks to forced locking (can be released)

- Crimping pressure precisely set at the factory (calibrated)

- Increased force due to toggle gear for less fatigue

- Very comfortable to use thanks to its practical shape and light weight

- Square crimping also for wire end ferrules up to 16 mm².

- Square crimp for optimum contact surfaces in the terminal

- Particularly suitable for all twin wire end ferrules up to 2 x 6 mm2 or 2 x AWG 8

- Capacities mm² / AWG : 0.08 to 16 mm². AWG 28 to 5

- Material : special grade chrome vanadium electrical steel, oil quenched

Knipex Crimp Tool for Wire Ferrules

Automatic crimping pliers for wire end ferrules from 0.08 to 16mm² with side access

Features and benefits

관련된 링크들