Knipex Twistor 16 Crimp Tool for Wire Ferrules

모든 Crimp Tools 열람하기

Subtotal (1 unit)*

₩448,079.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 8 개 단위 배송 준비 완료
  • 추가로 2026년 3월 02일 부터 13 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩448,079.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
176-4188
Distrelec 제품 번호:
301-16-795
제조사 부품 번호:
97 53 18
제조업체:
Knipex
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Knipex

Product Type

Crimp Tool

For Use With

Wire Ferrules

Height Safe

No

Series

Twistor 16

Overall Length

200mm

Minimum Wire Size mm²

0.08

Maximum Wire Size mm²

16

Minimum Wire Size AWG

28

Maximum Wire Size AWG

6

비준수

COO (Country of Origin):
DE

Automatic crimping pliers for wire end ferrules from 0.08 to 16mm² with 360° rotating head


The Knipex 16 Series Cable Crimper for end sleeves has a square crimp profile and high cable crimping capacity. It has a 360° rotating crimping die, with 8 tactile locking positions and has a high crimping quality. It is self-adjusting so there is no risk of crimping errors due to using the wrong crimping die or setting.

Features and Benefits


- 360° rotating crimping head with 8 engagement positions

- Square crimp profile, crimping range

- Crimping of wire end ferrules possible in almost any working position

- Crimping tool automatically adjusts to the individual sections

- Crimp opening accessible from both sides, end sleeves can be moved

- Crimping of twin end sleeves up to 2 x 6 mm² is possible

- Crimp quality is always high thanks to the forced locking (can be unlocked)

- Lightweight and handy tool, hand force reduced by lever mechanisms

- Compact design

- Ergonomic handles

- Slim head for ideal accessibility

- Capacities mm² / AWG : from 0.14 to 16 mm², AWG from 28 to 5

- Material: special grade chrome vanadium electric steel, oil-hardened

Typical applications


Crimping pliers can be used in many applications:

- Maintenance and repair

- Electrical installations

- Crimp shop

Product Maintenance


- To maintain proper operation and long service life, the shafts and other moving parts should be lubricated regularly.

- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.

- The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.

*Use a light non-mineral oil

관련된 링크들