HARTING Crimp Tool Crimp Tool for Han-Yellock Connector Contacts, Han E Connector Contacts, Han D Connector Contacts

모든 Crimp Tools 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩368,987.60

Add to Basket
수량 선택 또는 입력
재고있음
  • 83 개 단위 배송 준비 완료
  • 추가로 2026년 3월 30일 부터 2 개 단위 배송
  • 추가로 2026년 4월 13일 부터 90 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩368,987.60
5 +₩303,657.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
313-6607
Distrelec 제품 번호:
180-48-708
제조사 부품 번호:
09990000021
제조업체:
HARTING
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

HARTING

Sub Type

Crimp Tool

Product Type

Crimp Tool

For Use With

Han-Yellock Connector Contacts, Han E Connector Contacts, Han D Connector Contacts

Overall Length

255mm

Standards/Approvals

No

COO (Country of Origin):
DE

Harting Service Crimp Tool


A service crimp tool from Harting for use with solid turned Han D, Han E, and Han-Yellock Series crimp contacts. This crimp tool offers interchangeable locators designed for this range of crimp contacts and is capable of crimping male and female contacts from 0.14 mm to 2.5 mm. A ratchet mechanism has been incorporated into the device that prevents premature opening before the completion of a crimp, ensuring consistent crimping quality.

Features and Benefits

• Designed to operate on Harting Han D, Han E and Han-Yellock series crimp contacts

• Interchangeable locator

• Ratchet Action

• Early Release Action

• Reduced hand strain

What do you get?

• Service crimp tool

• Locator Han D (supplied loose)

• Locator Han E (mounted)

• Instructions

Typical Applications:

• Maintenance & repair

• Electrical Installations

• Cable assemblies

FAQ:

What are the benefits of a locator?

The locator guarantees that the crimp contact is terminated in the proper position. They can be removed by unscrewing the fixing screw on the fixed jaw.

What is the difference between un-insulated and insulated crimp tools?

Un-insulated crimp tools are typically used for general applications, where-as the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?

• Axles and other movable parts should be regularly lubricated.

• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

관련된 링크들