Nexperia 74HCT373D,652, 1 D Type Latch, 8-Bit Non-Inverting, 20-Pin SOIC

모든 Bus Transceivers 열람하기
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
RS 제품 번호:
170-8071
제조사 부품 번호:
74HCT373D,652
제조업체:
Nexperia
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Nexperia

Logic Family

74HCT

Logic Function

D Type

Number of Elements per Chip

1

Number of Channels per Chip

8

Polarity

Non-Inverting

Mounting Type

Surface Mount

Package Type

SO

Pin Count

20

Height

2.45mm

Length

13mm

Maximum Operating Supply Voltage

5.5 V

Minimum Operating Supply Voltage

4.5 V

Minimum Operating Temperature

-40 °C

Dimensions

13 x 7.6 x 2.45mm

Maximum Operating Temperature

+125 °C

Width

7.6mm

The 74HC373: 74HCT373 is an octal D-type transparent latch with 3-state outputs. The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of LE. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the latches. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Low switch leakage

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들