onsemi, Battery Charger IC 21V Input 3.3V Output 10 mA, TSSOP-16 16-Pin

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Battery Management 열람하기

Subtotal (1 reel of 2500 units)*

₩2,637,375.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 2,500 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
릴당*
2500 +₩1,054.95₩2,636,887.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
284-9045
제조사 부품 번호:
NCS35011DTBR2G
제조업체:
onsemi
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

onsemi

Product Type

Battery Charger IC

Sub Type

Multi-Cell Lithium-Ion Battery Monitor

Mount Type

Solder

Package Type

TSSOP-16

Pin Count

16

Output Current

10mA

Maximum Operating Temperature

85°C

Maximum Supply Voltage

21V

Length

5mm

Standards/Approvals

RoHS, REACH

Height

1mm

Minimum Operating Temperature

-40°C

Series

NCS35011

Automotive Standard

No

The ON Semiconductor ultra low power protection integrated circuit managing lithium-ion batteries from 3 to 5 cells in series with accurate battery voltage indication up to 5 LED outputs. Each cell in the battery pack is monitored for an over-voltage and under-voltage condition. Upon detecting an over-voltage, the ODI pin will assert indicating a fault condition and stay asserted until the fault is cleared. During an under voltage condition, the UDI pin will also assert indicating the fault but will have a pulse width that is pre−set in the protector. Both over and under voltage detections have a hard coded pre-set delay time before fault indication.

Over voltage and under voltage detection

Protection for 3, 4 and 5 series cells

High accuracy voltage measurement ±5 mV

These devices are Pb free and are RoHS compliant

관련된 링크들