FAG 609-2RSR-CO7-C3 1 Row Deep Groove Ball Bearing - 9 mm ID, 24 mm OD
- RS 제품 번호:
- 277-6629
- 제조사 부품 번호:
- 609-2RSR-CO7-C3
- 제조업체:
- FAG
Subtotal (1 pack of 10 units)*
₩128,940.00
재고있음
- 추가로 2026년 11월 02일 부터 40 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩12,894.00 | ₩128,940.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 277-6629
- 제조사 부품 번호:
- 609-2RSR-CO7-C3
- 제조업체:
- FAG
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FAG | |
| Inside Diameter | 9mm | |
| Product Type | Deep Groove Ball Bearing | |
| Outside Diameter | 24mm | |
| Race Width | 7mm | |
| Ball Material | Steel | |
| Cage Material | Steel | |
| Race Material | Bearing Steel | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Static Load Rating | 1.41kN | |
| Internal Clearance | C3 | |
| Dynamic Load Rating | 3.33kN | |
| Bore Type | Cylindrical | |
| Standards/Approvals | No | |
| Series | 609-2RSR-CO7-C3 | |
| Limiting Speed | 20300rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Flange Outside Diameter | 24mm | |
| Race Type | Deep Groove | |
| 모두 선택 | ||
|---|---|---|
브랜드 FAG | ||
Inside Diameter 9mm | ||
Product Type Deep Groove Ball Bearing | ||
Outside Diameter 24mm | ||
Race Width 7mm | ||
Ball Material Steel | ||
Cage Material Steel | ||
Race Material Bearing Steel | ||
End Type Sealed | ||
Number of Rows 1 | ||
Static Load Rating 1.41kN | ||
Internal Clearance C3 | ||
Dynamic Load Rating 3.33kN | ||
Bore Type Cylindrical | ||
Standards/Approvals No | ||
Series 609-2RSR-CO7-C3 | ||
Limiting Speed 20300rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Flange Outside Diameter 24mm | ||
Race Type Deep Groove | ||
제외
- COO (Country of Origin):
- JP
Schaeffler 609-2RSR-CO7-C3 Series Deep Groove Ball Bearing, 9mm Bore Diameter, 24mm Outside Diameter - 609-2RSR-CO7-C3
This deep groove ball bearing is a sealed single-row unit designed to support radial loads in rotating assemblies. It pairs steel rolling elements and hardened races to provide Durable rotational support across a broad operating temperature range and is suitable for installations requiring sealed protection and a Compact form.
Features and Benefits:
• Sealed design prevents ingress and extends service intervals
• C3 internal clearance permits thermal expansion at high speeds
• Steel cage offers dimensional stability under load
• Dynamic load capacity 3.33 kN supports sustained radial loads
• Limiting speed 20,300 r/min enables high-speed operation
• C3 internal clearance permits thermal expansion at high speeds
• Steel cage offers dimensional stability under load
• Dynamic load capacity 3.33 kN supports sustained radial loads
• Limiting speed 20,300 r/min enables high-speed operation
Applications
• Suitable for electric motor spindle support
• Used with small gearbox shafts in light machinery
• Ideal for Compact conveyor idler assemblies
• Can be used for precision hobby or robotic drives
• Used with small gearbox shafts in light machinery
• Ideal for Compact conveyor idler assemblies
• Can be used for precision hobby or robotic drives
What shaft shoulder dimensions must be respected for correct mounting?
The minimum diameter for the shaft shoulder is 11 mm and the maximum housing shoulder diameter permitted is 22 mm.
What operating temperatures can this unit tolerate?
It is rated for continuous operation from −30 °C up to 100 °C.
How should fillet radii and chamfers be handled during installation?
Maximum fillet radius on mating parts is 0.3 mm and minimum chamfer requirement is 0.3 mm.
What are the Basic static and fatigue load limits for design calculations?
The Basic static radial rating is 1.41 kN and the fatigue radial limit is 88 N.
What shoulder diameters on rings should be considered for housing fit?
The outer ring shoulder diameter is 19 mm and the inner ring shoulder diameter is 13.2 mm.
관련된 링크들
- FAG 609-2RSR-CO7 1 Row Deep Groove Ball Bearing - 9 mm ID, 24 mm OD
- FAG 627-2RSR-CO7 1 Row Deep Groove Ball Bearing - 7 mm ID, 22 mm OD
- FAG 609-HLN 1 Row Deep Groove Ball Bearing - 9 mm ID, 24 mm OD
- FAG 6308-RSR 1 Row Deep Groove Ball Bearing - 40 mm ID, 90 mm OD
- FAG 6012-RSR 1 Row Deep Groove Ball Bearing - 60 mm ID, 95 mm OD
- FAG 6307-RSR 1 Row Deep Groove Ball Bearing - 35 mm ID, 80 mm OD
- FAG 6010-RSR 1 Row Deep Groove Ball Bearing - 50 mm ID, 80 mm OD
- FAG 6011-RSR 1 Row Deep Groove Ball Bearing - 55 mm ID, 90 mm OD