FAG 609-2RSR-CO7 1 Row Deep Groove Ball Bearing - 9 mm ID, 24 mm OD
- RS 제품 번호:
- 277-6628
- 제조사 부품 번호:
- 609-2RSR-CO7
- 제조업체:
- FAG
Subtotal (10 units, in packs of 10)*
₩128,940.00
재고있음
- 추가로 2026년 10월 02일 부터 10 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩12,894.00 | ₩128,940.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 277-6628
- 제조사 부품 번호:
- 609-2RSR-CO7
- 제조업체:
- FAG
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FAG | |
| Product Type | Deep Groove Ball Bearing | |
| Inside Diameter | 9mm | |
| Outside Diameter | 24mm | |
| Race Width | 7mm | |
| Ball Material | Steel | |
| Cage Material | Steel Sheet Metal | |
| End Type | Sealed | |
| Number of Rows | 1 | |
| Static Load Rating | 1.41kN | |
| Dynamic Load Rating | 3.3kN | |
| Standards/Approvals | No | |
| Series | 60 | |
| Limiting Speed | 20300rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| 모두 선택 | ||
|---|---|---|
브랜드 FAG | ||
Product Type Deep Groove Ball Bearing | ||
Inside Diameter 9mm | ||
Outside Diameter 24mm | ||
Race Width 7mm | ||
Ball Material Steel | ||
Cage Material Steel Sheet Metal | ||
End Type Sealed | ||
Number of Rows 1 | ||
Static Load Rating 1.41kN | ||
Dynamic Load Rating 3.3kN | ||
Standards/Approvals No | ||
Series 60 | ||
Limiting Speed 20300rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
제외
- COO (Country of Origin):
- JP
Schaeffler Series 60 Deep Groove Ball Bearing, 9mm Inside Diameter, 24mm Outside Diameter - 609-2RSR-CO7
This deep groove ball bearing is designed to support radial loads and enable smooth rotational motion in Compact electromechanical systems. It is a single-row, sealed unit with a steel sheet metal cage, intended for use where Compactness and sealed operation are required within industrial automation, electronics and electrical equipment.
Features & Benefits
• Sealed construction prevents contaminant ingress and reduces maintenance
• High permissible speed of 20,300 r/min supports fast-rotating shafts
• Dynamic capacity of 3.3 kN endures fluctuating radial loads
• Static capacity of 1.41 kN resists shock and standstill loads
• Low fatigue limit of 88 N indicates fatigue performance under repeated stress
• Operating range −30°C to 100°C suits varied temperature environments
• High permissible speed of 20,300 r/min supports fast-rotating shafts
• Dynamic capacity of 3.3 kN endures fluctuating radial loads
• Static capacity of 1.41 kN resists shock and standstill loads
• Low fatigue limit of 88 N indicates fatigue performance under repeated stress
• Operating range −30°C to 100°C suits varied temperature environments
**Applications**
• Suitable for miniature motors in automation equipment
• Ideal for spindle support in small electric actuators
• Used with precision fans and cooling blowers in electronics
• Can be used for rotary encoders in control systems
• Used for Compact gearboxes in robotics joints
• Ideal for spindle support in small electric actuators
• Used with precision fans and cooling blowers in electronics
• Can be used for rotary encoders in control systems
• Used for Compact gearboxes in robotics joints
What shaft shoulder and housing shoulder limits should I check during assembly?
Ensure the shaft shoulder diameter meets the minimum clearance of 11mm and the housing shoulder does not exceed 22mm to avoid interference with ring shoulders.
How should chamfer and fillet dimensions be accommodated in mating parts?
Provide a minimum chamfer of 0.3mm and keep fillet radii at mating shoulders below 0.3mm to permit proper seating of the rings.
What weight and handling considerations apply for installation?
The unit weighs 16 g, enabling manual handling without special lifting aids
handle with care to avoid seal damage.
Which calculation factor is useful for life estimations?
Use the provided calculation factor of 12.8 when applying standard bearing life formulae for planning service intervals.
관련된 링크들
- FAG 609-2RSR-CO7-C3 Deep Groove Ball Bearing - 9 mm ID, 24 mm OD
- FAG 627-2RSR-CO7 1 Row Deep Groove Ball Bearing - 7 mm ID, 22 mm OD
- FAG 609-HLN 1 Row Deep Groove Ball Bearing - 9 mm ID, 24 mm OD
- FAG 6309-RSR 1 Row Deep Groove Ball Bearing - 45 mm ID, 100 mm OD
- FAG 6010-RSR 1 Row Deep Groove Ball Bearing - 50 mm ID, 80 mm OD
- FAG 6009-RSR 1 Row Deep Groove Ball Bearing - 45 mm ID, 75 mm OD
- FAG 6307-RSR 1 Row Deep Groove Ball Bearing - 35 mm ID, 80 mm OD
- FAG 6007-RSR 1 Row Deep Groove Ball Bearing - 35 mm ID, 62 mm OD