FAG S6005-2RSR-HLC 1 Row Ball Bearing - 25 mm ID, 47 mm OD

This ball bearing is a sealed, single-row deep groove unit designed for rotational support in precision electromechanical assemblies. It is built with corrosion-resistant rings and stainless steel rolling elements to perform reliably in applications requiring sealed protection and Compact radial load handling. The bearing’s construction suits integration where a parallel bore and closed ends are required for straightforward mounting and containment.

• Dynamic load capacity 8.55 kN for sustained radial forces
• Static load capacity 4.68 kN to withstand Peak loads
• Limiting speed 8,400 r/min for high-speed operation
• Internal clearance CN enabling consistent running accuracy
• Steel cage with stainless balls for corrosion resilience
• Sealed (2RSR) design to reduce contamination ingress

• Suitable for precision motors in automation equipment
• Ideal for small gearbox input shafts in robotics
• Used with rotary encoders in electronic control systems
• Can be used for spindle supports in test fixtures
• Used for shaft support in electrical actuators

Ensure shaft shoulder diameter and housing shoulder limits meet the component’s mounting dimensions: the minimum shaft shoulder diameter and maximum housing shoulder diameter must be observed to avoid ring interference and ensure proper seating.

The bearing operates between −30°C and 100°C, so it is suitable for most indoor industrial settings and many outdoor applications within that temperature range.

Respect the maximum fillet radius of 0.6 mm and minimum chamfer of 0.6 mm to prevent contact with the ring corners and to allow correct axial seating.

Use the radial fatigue limit Value of 310 N when calculating bearing life under recurring load cycles to assess endurance under given operating loads.