FAG 61906-2RSR-HLC 1 Row Ball Bearing - 30 mm ID, 47 mm OD
- RS 제품 번호:
- 260-0699
- 제조사 부품 번호:
- 61906-2RSR-HLC
- 제조업체:
- FAG
Subtotal (1 unit)*
₩65,740.00
일시적 품절
- 2026년 10월 20일 부터 17 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩65,740.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 260-0699
- 제조사 부품 번호:
- 61906-2RSR-HLC
- 제조업체:
- FAG
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FAG | |
| Inside Diameter | 30mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 47mm | |
| Race Width | 9mm | |
| Cage Material | Steel | |
| Race Material | Bearing Steel | |
| Ball Material | Steel | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 5.01kN | |
| Dynamic Load Rating | 7.24kN | |
| Bore Type | Cylindrical | |
| Standards/Approvals | No | |
| Series | 619-2RSR | |
| Limiting Speed | 7600rpm | |
| Flange Outside Diameter | 47mm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Race Type | Deep Groove | |
| 모두 선택 | ||
|---|---|---|
브랜드 FAG | ||
Inside Diameter 30mm | ||
Product Type Ball Bearing | ||
Outside Diameter 47mm | ||
Race Width 9mm | ||
Cage Material Steel | ||
Race Material Bearing Steel | ||
Ball Material Steel | ||
End Type Closed | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 5.01kN | ||
Dynamic Load Rating 7.24kN | ||
Bore Type Cylindrical | ||
Standards/Approvals No | ||
Series 619-2RSR | ||
Limiting Speed 7600rpm | ||
Flange Outside Diameter 47mm | ||
Bearing Type Single Row Deep Groove Ball | ||
Race Type Deep Groove | ||
제외
- COO (Country of Origin):
- JP
Schaeffler 619-2RSR Series Ball Bearing, 30mm Bore Diameter, 47mm Outside Diameter - 61906-2RSR-HLC
This ball bearing is a single-row deep-groove unit designed to support radial loads and enable smooth rotational movement in rotating machinery. It features sealed faces and a steel cage, suited to installations requiring contained lubrication and moderate-speed operation within a defined temperature range.
Features and Benefits:
• Dynamic load capacity 7.24 kN for sustained radial loading
• Static load capacity 5.01 kN resists deformation under shock
• Limiting speed 7,600 r/min supports higher-speed applications
• Internal clearance CN maintains controlled axial and radial play
• Steel construction and sealed ends reduce contamination ingress
• Flange outside diameter 47 mm aids axial location in housings
• Static load capacity 5.01 kN resists deformation under shock
• Limiting speed 7,600 r/min supports higher-speed applications
• Internal clearance CN maintains controlled axial and radial play
• Steel construction and sealed ends reduce contamination ingress
• Flange outside diameter 47 mm aids axial location in housings
Applications
• Suitable for precision motor and spindle assemblies
• Used with gearboxes requiring sealed rotational elements
• Ideal for Compact pump and compressor shafts
• Can be used for conveyor idlers in enclosed housings
• Used for small electric drive units with moderate speeds
• Used with gearboxes requiring sealed rotational elements
• Ideal for Compact pump and compressor shafts
• Can be used for conveyor idlers in enclosed housings
• Used for small electric drive units with moderate speeds
What shaft and housing interfaces must be checked before fitting?
Verify the shaft shoulder diameter meets the minimum clearance and the housing shoulder does not exceed the specified maximum fillet radius to ensure correct seating.
What operating temperatures can be expected for continuous service?
The unit operates across a defined temperature range from -30°C to 100°C for normal service.
How should speed limitations influence system design?
Design should restrict rotational speed to the listed limiting speed to prevent accelerated wear and heat generation in the Seals and raceways.
What mass should be accounted for when calculating rotating inertia?
Use the stated mass of 0.048 kg when evaluating rotor inertia and balancing requirements.
관련된 링크들
- FAG 61906-HLC 1 Row Deep Groove Ball Bearing - 30 mm ID, 47 mm OD
- FAG 61906-2Z-HLC 1 Row Ball Bearing - 30 mm ID, 47 mm OD
- FAG 61807-2RSR-HLC 1 Row Ball Bearing - 35 mm ID, 47 mm OD
- FAG S6303-2RSR-HLC 2 Row Ball Bearing - 17 mm ID, 47 mm OD
- FAG S6005-2RSR-HLC 1 Row Ball Bearing - 25 mm ID, 47 mm OD
- FAG 61900-2RSR-HLC 1 Row Ball Bearing - 10 mm ID, 22 mm OD
- FAG 61800-2RSR-HLC 1 Row Ball Bearing - 10 mm ID, 19 mm OD
- FAG 61802-2RSR-HLC 1 Row Ball Bearing - 15 mm ID, 24 mm OD