FAG 608-2Z-C3-HLN 1 Row Ball Bearing - 8 mm ID, 22 mm OD
- RS 제품 번호:
- 260-0563
- 제조사 부품 번호:
- 608-2Z-C3-HLN
- 제조업체:
- FAG
Subtotal (1 pack of 10 units)*
₩63,160.00
재고있음
- 50 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩6,316.00 | ₩63,160.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 260-0563
- 제조사 부품 번호:
- 608-2Z-C3-HLN
- 제조업체:
- FAG
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FAG | |
| Product Type | Ball Bearing | |
| Inside Diameter | 8mm | |
| Outside Diameter | 22mm | |
| Race Width | 7mm | |
| Cage Material | Steel | |
| Ball Material | Steel | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Internal Clearance | C3 | |
| Static Load Rating | 1.368kN | |
| Dynamic Load Rating | 3.297kN | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Series | 60 | |
| Limiting Speed | 40000rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Race Type | Plain | |
| 모두 선택 | ||
|---|---|---|
브랜드 FAG | ||
Product Type Ball Bearing | ||
Inside Diameter 8mm | ||
Outside Diameter 22mm | ||
Race Width 7mm | ||
Cage Material Steel | ||
Ball Material Steel | ||
End Type Closed | ||
Number of Rows 1 | ||
Internal Clearance C3 | ||
Static Load Rating 1.368kN | ||
Dynamic Load Rating 3.297kN | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Series 60 | ||
Limiting Speed 40000rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Race Type Plain | ||
제외
Schaeffler Series 60 Ball Bearing, 8mm Inside Diameter, 22mm Outside Diameter - 608-2Z-C3-HLN
This ball bearing is a single-row deep-groove bearing designed to support radial loads in Compact rotating assemblies within automation, electronics and mechanical systems. It features metal shields on both sides and a parallel bore, enabling smooth rotation at high speeds while maintaining a Compact profile suited to tight housings.
Features & Benefits
• Limiting speed 40000 r/min enables high-speed operation
• Dynamic load capacity 3.297 kN increases service life under cyclic loads
• Static load rating 1.368 kN resists deformation during heavy stops
• Steel sheet cage provides robust retention at elevated rpm
• Dynamic load capacity 3.297 kN increases service life under cyclic loads
• Static load rating 1.368 kN resists deformation during heavy stops
• Steel sheet cage provides robust retention at elevated rpm
**Applications**
• Suitable for high-speed motor spindles in automation equipment
• Ideal for rotary encoders and precision electromechanical actuators
• Used for fan and blower shafts in electronics cooling systems
• Can be used for small gearbox input shafts in machinery
• Ideal for rotary encoders and precision electromechanical actuators
• Used for fan and blower shafts in electronics cooling systems
• Can be used for small gearbox input shafts in machinery
What temperature range can it operate within?
It functions between -30°C and 120°C, covering typical industrial ambient and elevated operating temperatures.
How should shaft and housing fillets be managed during installation?
Maximum allowable fillet radius at seating faces is 0.3mm and minimum chamfer depth is 0.3mm to ensure correct seating and avoid ring interference.
What are the recommended maximum shoulder dimensions for mounting?
The shaft shoulder should be at least 10mm in diameter and the housing shoulder may be up to 20mm to maintain appropriate ring support.
How does the bearing behave under fatigue-limited operation?
The radial fatigue load limit is 74 N, indicating the threshold for long-term material endurance under repeated stress cycles.
관련된 링크들
- FAG 608-2Z-HLN 1 Row Ball Bearing - 8 mm ID, 22 mm OD
- FAG 608-HLN 1 Row Ball Bearing - 8 mm ID, 22 mm OD
- FAG 608-2RSR-HLN 1 Row Deep Groove Ball Bearing - 8 mm ID, 22 mm OD
- FAG 608-2RSR-HLN-C3 1 Row Deep Groove Ball Bearing - 8 mm ID, 22 mm OD
- FAG 627-2Z-HLN 1 Row Ball Bearing - 7 mm ID, 22 mm OD
- FAG 606-2Z-HLN 1 Row Ball Bearing - 6 mm ID, 17 mm OD
- FAG 625-2Z-HLN 1 Row Ball Bearing - 5 mm ID, 16 mm OD
- FAG 609-2Z-HLN 1 Row Ball Bearing - 9 mm ID, 24 mm OD