SMC Compressed Air Pipe Red Polyurethane 12 mm 100 m TU Series

모든 Air Hoses 열람하기

Subtotal (1 unit)*

₩853,140.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 9월 24일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩853,140.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
281-1022
제조사 부품 번호:
TU1208R-100
제조업체:
SMC
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SMC

Product Type

Compressed Air Pipe

Colour

Red

Material

Polyurethane

Length

100m

Maximum Operating Pressure

8 bar

Application

Pneumatic Tubing

Series

TU

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

60°C

Inside Diameter

8mm

Outside Diameter

12mm

Standards/Approvals

RoHS

COO (Country of Origin):
US

SMC Series TU Compressed Air Pipe, 8mm Inside Diameter, 100m Length - TU1208R-100


This compressed Air pipe is a red polyurethane pneumatic tubing designed for conveying compressed Air in automation and industrial systems. It is intended for general pneumatic use where flexible, Durable Air lines are required and is supplied as a continuous roll suitable for workshop installation or machine integration.

Features & Benefits


• Compatible with pneumatic systems up to 8 bar working pressure
• Wide operating temperature range from -20 to 60°C supports varied environments
• Polyurethane construction provides flexibility and abrasion resistance
• 8mm internal bore enables Compact Air distribution for control circuits
• 12mm outside diameter allows secure fittings connection
• Supplied in a 100 m roll for extended continuous runs

**Applications**


• Suitable for factory automation pneumatic control lines
• Ideal for feeding valves and actuators in assembly equipment
• Used with electrical panel Pneumatic Components for Air supply
• Can be used for test rigs requiring long continuous tubing runs

What material properties affect kink resistance during installation?


The thermoplastic polyurethane composition balances flexibility and stiffness to reduce kinking while allowing tight routing through machinery.

How should tube ends be prepared for push-in fittings?


Cut squarely with a Sharp tube cutter, deburr if necessary, and insert fully to the fitting’s stop to ensure an air-tight connection.

Can it be exposed to elevated ambient temperatures near equipment?


Continuous exposure should remain within the specified -20 to 60°C operating range to maintain mechanical properties and pressure performance.

How does the tubing behave under dynamic motion in automation?


The polyurethane offers good fatigue resistance for repeated flexing typical of pick-and-place and gantry applications.

Is the product suitable for electronic equipment rooms?


Its material is compliant with RoHS restrictions, making it appropriate where restricted substances must be avoided.

관련된 링크들