SMC Compressed Air Pipe Yellow Polyurethane 6 mm 20 m TUZ Series, TUZ0604

모든 Air Hoses 열람하기

Subtotal (1 unit)*

₩49,060.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 8 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩49,060.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
366-340
제조사 부품 번호:
TUZ0604Y-20
제조업체:
SMC
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SMC

Product Type

Compressed Air Pipe

Colour

Yellow

Material

Polyurethane

Length

20m

Maximum Operating Pressure

0.8 Mpa

Series

TUZ

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

60°C

Resistance Features

Wear Resistant

Inside Diameter

4mm

Outside Diameter

6mm

Standards/Approvals

RoHS

Model Number

TUZ0604

COO (Country of Origin):
JP

SMC TUZ Series Compressed Air Pipe, 20m Length, 4mm Inside Diameter - TUZ0604Y-20


This compressed Air pipe is a flexible polyurethane line designed for pneumatic conveyance in industrial settings. It provides a Durable conduit for low-pressure Air distribution and is suited to environments where small-bore, visible tubing is required. The product is supplied in a bright yellow finish to aid identification in installations and maintenance tasks.

Features & Benefits


• 0.8 MPa maximum pressure rating for dependable pneumatic service
• Wear-resistant material reduces abrasion-related failures
• Operates from -20 to 60°C for varied ambient conditions
• RoHS compliance supports regulated material selection
• Polyurethane construction offers flexibility and kink resistance

**Applications**


• Suitable for automated valve actuation in factory assembly lines
• Ideal for control Air runs in electronics manufacturing cells
• Used with pneumatic tools in mechanical workshops
• Can be used for signal Air tubing in electrical panel cabinets
• Used for short-distance distribution in pneumatic test rigs

What internal diameter is appropriate for precision Air control?


The internal bore measures 4 mm, which is suited to small-volume signal and control Air circuits where low internal volume and quick pressure response are needed.

How long is a single length and how does that affect installation runs?


The line is supplied as a 20 m length, allowing continuous routing along equipment racks without frequent joins, reducing potential leak points.

What outer diameter should I allow for when planning cable-tray space?


The external diameter is 6 mm, so plan tray and clip spacing accordingly to ensure secure retention and minimal chafing.

Which material properties influence flexibility and handling during routing?


Polyurethane provides a balance of pliability and shape memory, enabling tight routing while resisting permanent deformation under typical pneumatic stresses.

관련된 링크들