John Drummond, LED Voltage Tester, 500V ac/dc, Mains Powered CAT IV, CAT III, MTL20
- RS 제품 번호:
- 706-8577
- 제조사 부품 번호:
- MTL20
- 제조업체:
- John Drummond
Subtotal (1 unit)*
₩199,793.24
재고있음
- 4 개 단위 배송 준비 완료
- 추가로 2026년 4월 03일 부터 8 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩199,793.24 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 706-8577
- 제조사 부품 번호:
- MTL20
- 제조업체:
- John Drummond
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | John Drummond | |
| Product Type | Voltage Tester | |
| Display Type | LED | |
| IP Rating | IP67 | |
| Power Source | Mains | |
| Weight | 350g | |
| Minimum Operating Temperature | -10°C | |
| Maximum Voltage | 500V ac/dc | |
| Maximum Operating Temperature | 55°C | |
| Hazardous Area Certification | No | |
| Length | 213mm | |
| Standards/Approvals | BS EN 61326-1 | |
| Width | 112 mm | |
| Height | 72mm | |
| Safety Category Level | CAT IV, CAT III | |
| Safety Category Voltage | 1000V | |
| 모두 선택 | ||
|---|---|---|
브랜드 John Drummond | ||
Product Type Voltage Tester | ||
Display Type LED | ||
IP Rating IP67 | ||
Power Source Mains | ||
Weight 350g | ||
Minimum Operating Temperature -10°C | ||
Maximum Voltage 500V ac/dc | ||
Maximum Operating Temperature 55°C | ||
Hazardous Area Certification No | ||
Length 213mm | ||
Standards/Approvals BS EN 61326-1 | ||
Width 112 mm | ||
Height 72mm | ||
Safety Category Level CAT IV, CAT III | ||
Safety Category Voltage 1000V | ||
해당 안됨
- COO (Country of Origin):
- PH
Drummond Test Lamp MTL20
Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems
Additional two button test allows the unit to draw a high current to differentiate between potentially hazardous phantom voltages and hazardous persistent voltages
Finger shields and insulated probe tips with only 4mm of exposed metal
Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant
Meets the UK Health and Safety Executive guidance notes on electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
No batteries required
Mains Voltage Indicators - Contact
Caution
Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit.
Supplied with
Right angled probe tip, two straight tips and instructions
관련된 링크들
- John Drummond, LED Voltage Tester, 500V ac/dc, Mains Powered CAT IV, CAT III, MTL10
- John Drummond MTL15, LED Voltage Tester, 1000V ac/dc CAT IV, MTL15
- Martindale, LED Voltage Tester, 1000V, Mains Powered CAT IV, VI15000
- Beha-Amprobe 2100-alpha, LED Voltage Tester, 690V ac/dc Continuity Check, Mains Powered CAT III, CAT IV, 2100-alpha
- RS PRO, LCD Voltage Tester, 1000V ac/dc, Battery Powered CAT IV, CAT III
- Wiha, LCD Voltage Tester, 1000V ac Continuity Check, Battery Powered CAT IV, 44319
- Gossen Metrawatt, LCD Voltage Tester, 690V Continuity Check, Battery Powered CAT III, CAT IV, M630J
- Fluke T6-1000, LCD Voltage Tester, 1000V, Battery Powered CAT IV, CAT III, T6-1000