Microchip 1 Microprocessor Supervisory Circuit 4-Pin 2.63 V SOT-143
- RS 제품 번호:
- 244-9846P
- 제조사 부품 번호:
- MIC811RUY-TR
- 제조업체:
- Microchip
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal 50 units (supplied on a continuous strip)*
₩33,540.00
일시적 품절
- 2026년 7월 20일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 50 - 75 | ₩670.80 |
| 100 - 225 | ₩639.60 |
| 250 - 975 | ₩627.90 |
| 1000 + | ₩616.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 244-9846P
- 제조사 부품 번호:
- MIC811RUY-TR
- 제조업체:
- Microchip
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Microchip | |
| Product Type | Microprocessor Supervisory Circuit | |
| Sub Type | Microprocessor Supervisory Circuit | |
| Number of Supervisors | 1 | |
| Watchdog Timer | No | |
| Manual Reset | Yes | |
| Power Fail Detection | No | |
| Output Driver | CMOS | |
| Mount Type | Surface | |
| Package Type | SOT-143 | |
| Pin Count | 4 | |
| Reset Active Time | 140ms | |
| Minimum Operating Temperature | -40°C | |
| Monitored Voltage | 1V | |
| Reset Threshold Voltage | 2.63V | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS | |
| Series | MIC811 | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 1V | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Microchip | ||
Product Type Microprocessor Supervisory Circuit | ||
Sub Type Microprocessor Supervisory Circuit | ||
Number of Supervisors 1 | ||
Watchdog Timer No | ||
Manual Reset Yes | ||
Power Fail Detection No | ||
Output Driver CMOS | ||
Mount Type Surface | ||
Package Type SOT-143 | ||
Pin Count 4 | ||
Reset Active Time 140ms | ||
Minimum Operating Temperature -40°C | ||
Monitored Voltage 1V | ||
Reset Threshold Voltage 2.63V | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS | ||
Series MIC811 | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 1V | ||
Automotive Standard No | ||
The microchip microprocessor reset circuit is an expensive and has supervisory circuit that monitor power supplies in microprocessor based systems. T he function of this device is to asset if either the power supply drops below a designated reset threshold level is forced low. the microprocessor has an active reset output, while the microprocessor offers an active high reset output. The reset output is guaranteed to remain asserted for a minimum of 140ms after vcc has risen above the designated reset threshold level. Having a push-pull output stage . If a microprocessor voltage supervisor with an open-drain output stage is needed.
140ms minimum reset pulse width available
The precision voltage monitor for 3v, 3.3v or 5v power supplies
It is a manual reset input
Reset remains valid with VCC as low as 1v