Microchip 1 Voltage Supervisor 3-Pin 2.6 V SOT-23
- RS 제품 번호:
- 236-8878P
- 제조사 부품 번호:
- MIC803-26D2VM3-TR
- 제조업체:
- Microchip
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal 50 units (supplied on a continuous strip)*
₩30,000.00
재고있음
- 추가로 2026년 7월 27일 부터 2,125 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 50 - 75 | ₩600.00 |
| 100 - 225 | ₩590.00 |
| 250 - 975 | ₩578.00 |
| 1000 + | ₩568.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 236-8878P
- 제조사 부품 번호:
- MIC803-26D2VM3-TR
- 제조업체:
- Microchip
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Microchip | |
| Sub Type | Power On Reset Circuit | |
| Product Type | Voltage Supervisor | |
| Number of Supervisors | 1 | |
| Watchdog Timer | No | |
| Manual Reset | No | |
| Power Fail Detection | No | |
| Package Type | SOT-23 | |
| Pin Count | 3 | |
| Reset Active Time | 1120ms | |
| Minimum Operating Temperature | -40°C | |
| Reset Threshold Voltage | 2.6V | |
| Monitored Voltage | 1V | |
| Maximum Operating Temperature | 125°C | |
| Length | 2.3mm | |
| Standards/Approvals | RoHS | |
| Series | MIC803 | |
| Maximum Supply Voltage | 5.5V | |
| Automotive Standard | No | |
| Minimum Supply Voltage | 1V | |
| 모두 선택 | ||
|---|---|---|
브랜드 Microchip | ||
Sub Type Power On Reset Circuit | ||
Product Type Voltage Supervisor | ||
Number of Supervisors 1 | ||
Watchdog Timer No | ||
Manual Reset No | ||
Power Fail Detection No | ||
Package Type SOT-23 | ||
Pin Count 3 | ||
Reset Active Time 1120ms | ||
Minimum Operating Temperature -40°C | ||
Reset Threshold Voltage 2.6V | ||
Monitored Voltage 1V | ||
Maximum Operating Temperature 125°C | ||
Length 2.3mm | ||
Standards/Approvals RoHS | ||
Series MIC803 | ||
Maximum Supply Voltage 5.5V | ||
Automotive Standard No | ||
Minimum Supply Voltage 1V | ||
The Microchip single voltage supervisor with open drain RESET output that provides accurate power supply monitoring and reset generation in microprocessor based systems. The function of the device is to assert a reset signal if the power supply voltage drops below the reset threshold voltage, and retain this reset for the reset timeout period once the power supply increases above the reset threshold voltage.
4.5 μA Supply current typical at 3.6 V
Open-Drain /RESET output
RESET Remains Valid with VCC as low as 1 V
20 ms, 140 ms, or 1120 ms Minimum reset timeout options
2.63 V to 4.63 V Preset voltage threshold options
2.5 % Voltage Threshold accuracy over temperature
–40°C to +125°C Junction temperature range
관련된 링크들
- RS PRO Steel Perforated DIN Rail, Top Hat Compatible, 500mm x 35mm x 7.5mm
- 6EP3334-8SB00-0AY0 | Siemens SITOP PSU8200 Switched Mode DIN Rail Power Supply, 120 → 230V ac ac Input, 24V dc dc Output, 10A Output,
- H3CR-A8 AC24-48/DC12-48 | Omron H3CR Series DIN Rail, Panel Mount Timer Relay, 12 → 48 V dc, 24 → 48V ac, 2-Contact, 0.05 s
- 52104571 | Lapp Cable Gland Adaptor, M20 Exterior Thread, M16 Interior Thread, Nickel Plated Brass, SKINDICHT Series
- 515015-601 | Latching Push Button Switch, IP67, Panel Mount
- Fluke LVD2 Non Contact Voltage Detector
- BD-02PMMS-LC7001 | Amphenol Industrial Circular Connector, 2 Contacts, Panel Mount, Plug, Male, IP67, Ceres Series
- RS PRO Type K Thermocouple 2m Length, 0.3mm Diameter → +600°C
