제조사부품번호

Festo Pressure Switch 0 bar to 8 bar

RS 제품 번호:: 126-0213
제조사 부품 번호:: PE-1/8-1N-SW
제조업체:: Festo

Subtotal (1 unit)*

₩382,520.00

추가로 2026년 10월 05일 부터 13 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩382,520.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 126-0213
제조사 부품 번호:: PE-1/8-1N-SW
제조업체:: Festo

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Festo
	Product Type	Pressure Switch
	Minimum Operating Pressure	0bar
	Port Size	1/8 in
	Switch Output	Analogue
	Current	100mA
	Suitable Medias	Compressed Air
	Mount Type	Through Hole
	Pressure Type	Relative Pressure
	Voltage	250V ac, 250V ac
	Series	PE
	Maximum Operating Pressure	8 bar
	Connection Thread Standard	G
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	ISO
	Height	51mm
	Depth	88.5mm
	Width	27mm
	IP Rating	IP65
	Hazardous Area Certification	No

	모두 선택
	브랜드 Festo
	Product Type Pressure Switch
	Minimum Operating Pressure 0bar
	Port Size 1/8 in
	Switch Output Analogue
	Current 100mA
	Suitable Medias Compressed Air
	Mount Type Through Hole
	Pressure Type Relative Pressure
	Voltage 250V ac, 250V ac
	Series PE
	Maximum Operating Pressure 8 bar
	Connection Thread Standard G
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 60°C
	Standards/Approvals ISO
	Height 51mm
	Depth 88.5mm
	Width 27mm
	IP Rating IP65
	Hazardous Area Certification No

COO (Country of Origin):: BG

Festo Series PE Pressure Switch, 1/8 inches Port size, 8 Bar Maximum Operating Pressure - PE-1/8-1N-SW, Numeric Part Number: 6484

This pressure switch monitors relative pressure in compressed Air systems and provides an analogue switching output for control or signalling tasks. It is designed for panel or equipment installation with a G-thread process connection and suits industrial environments requiring an IP65 enclosure rating.

Features & Benefits

• Accepts up to 8 bar enabling high-pressure monitoring and control
• Operates between 0°C and 60°C for standard industrial temperature ranges
• Rated for 250V and 100mA to Interface with common control circuits
• Through-hole mounting supports secure, permanent installation
• Analogue switch output allows proportional signalling to controllers
• ISO standards alignment supports consistency with industrial practices

Applications

• Suitable for pneumatic control panels in factory automation
• Ideal for monitoring shop compressed Air supply lines
• Used with machine safety systems requiring pressure feedback
• Can be used for process monitoring in mechanical workshops
• Used for integration into equipment where G-thread fittings are specified

What media can it measure safely?

It is specified for use with compressed Air and is configured for relative pressure measurement only.

What ingress protection does the enclosure provide?

The enclosure meets IP65, protecting against dust ingress and low-pressure water jets.

What electrical connection limits should be observed?

The switching contact is rated at 250V with a maximum current of 100mA

wiring and downstream devices must accommodate those limits.

How is the sensor mounted to equipment?

The device is intended for through-hole mounting, requiring a fixed panel or bracket installation using its threaded port.

What pressure range can be detected from zero?

It can detect from 0 bar up to its 8 bar maximum operating pressure.