Festo Vacuum Pump, 0.95 mm nozzle, 4.5 bar 25 L/min, VN series

모든 Vacuum Generators 열람하기

Subtotal (1 unit)*

₩82,120.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 7월 13일 부터 13 개 단위 배송
  • 추가로 2026년 8월 07일 부터 10 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩82,120.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
202-2427
Distrelec 제품 번호:
301-69-876
제조사 부품 번호:
VN-10-H-T3-PI4-VI4-RI4
제조업체:
Festo
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Festo

Maximum Suction Flow

25L/min

Product Type

Vacuum Pump

Maximum Vacuum Pressure

4.5bar

Nozzle Diameter

0.95mm

Series

VN

Silencer

No

Inlet Thread Standard

G 1/8

Outlet Thread Standard

G 1/8

Maximum Operating Temperature

60°C

Hazardous Area Certification

No

Standards/Approvals

ISO8573-1:2010 (7:4:4), RoHS

Outlet Port Size

1/8 in G

COO (Country of Origin):
HU

Festo Series VN Vacuum Pump, 25L/min Maximum Suction Flow, 4.5 Bar Maximum Vacuum Pressure - VN-10-H-T3-PI4-VI4-RI4, Numeric Part Number: 193500


This vacuum pump provides compact, pneumatic suction for automation and industrial tasks. It is designed to draw modest volumes of Air for component handling and process support within equipment that requires a small, robust vacuum source. The unit operates within standard industrial temperature limits and connects using G 1/8 ports for straightforward integration into pneumatic systems.

Features and Benefits:


• 25L/min maximum suction flow supports light-duty pick-and-place
• 4.5bar maximum vacuum pressure enables secure part holding
• 0.95mm nozzle diameter offers fine-point suction control
• G1/8 inlet and outlet ports permit simple pneumatic connections
• Rated to 60°C maximum operating temperature for warm environments
• Meets ISO 8573-1:2010 (7:4:4) particulate and oil quality requirements

Applications


• Suitable for pick-and-place in electronics assembly lines
• Ideal for vacuum gripping of small mechanical components
• Used with pneumatic end‑effectors in automation cells
• Can be used for board handling where Compact suction is required
• Used for light vacuum evacuation in electrical test fixtures

What thread standard is used for plumbing the pump into a system?


The connections use G 1/8 thread standard for both inlet and outlet ports to match common pneumatic fittings.

How should it be applied where ambient temperature fluctuates?


It is specified for operation up to 60°C, so installations with higher ambient temperatures or heat sources require additional cooling or relocation.

What indications are there of contamination control capability?


The pump’s conformity to ISO 8573-1:2010 (7:4:4) reflects its handling of Air quality in terms of particle, water and oil classes under that standard.

Is the unit suitable for hazardous-area installations?


It has no hazardous-area certification and should not be used where specific explosion‑proof approvals are required.

관련된 링크들