FTDI Chip FT2233HPQ-TRAY, USB Bridge IC, 2-Channel, 12Mbps, USB 2.0, 3.3 V, 76-Pin QFN-76

모든 USB Interface ICs 열람하기
대량 구매 할인 기용 가능

Subtotal (1 tray of 260 units)*

₩2,516,831.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 780 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
Per Tray*
260 - 1040₩9,680.12₩2,517,026.72
1300 +₩9,486.48₩2,466,680.32

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
228-3120
제조사 부품 번호:
FT2233HPQ-TRAY
제조업체:
FTDI Chip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

FTDI Chip

Number of Transceivers

2

Data Rate

12Mbps

Protocols Supported

USB 2.0

IC Type

Controller IC

Power Supply Type

Single

ESD Protection

Yes

Typical Single Supply Voltage

3.3 V

Package Type

QFN-76

Pin Count

76

The FTDI Chip FT2233HP/FT2232HP is a Hi-Speed USB device with a Type-C/PD 3.0 controller that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 2 independent channels compatible with the FT2232H – Dual Hi-speed USB to multipurpose UART/MPSSE solution.

Supports Power Delivery (PD) Specification 3.0.
2 x USB PD 3.0 Port Support. Port 1 supports Dual Role Swap Function while Port 2 supports sink mode with charging function through to Port 1.
Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source.
Type-C/PD Physical Layer Protocol.
PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM.
PD mode configuration through external EEPROM.
Options to use external MCU controlling PD policy through I2C interface

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들