제조사부품번호

FTDI Chip, Controller IC, 4-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 76-Pin QFN

RS 제품 번호:: 228-3129
제조사 부품 번호:: FT4233HPQ-TRAY
제조업체:: FTDI Chip

FTDI Chip, Controller IC, 4-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 76-Pin QFN

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 tray of 260 units)*

₩3,064,287.20

재고있음

260 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	Per Tray*
260 - 1040	₩11,785.72	₩3,064,384.96
1300 +	₩11,550.72	₩3,003,089.44

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 228-3129
제조사 부품 번호:: FT4233HPQ-TRAY
제조업체:: FTDI Chip

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	FTDI Chip
	Product Type	Controller IC
	Number of Transceivers	4
	Maximum Data Rate	12Mbps
	Sub Type	Controller
	USB Specification	USB Type C
	Power Supply Type	Single
	ESD Protection	Yes
	Minimum Supply Voltage	3.3V
	Maximum Supply Voltage	1.32V
	Mount Type	Surface
	Package Type	QFN
	Pin Count	76
	Supported Protocols	USB 2.0
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Standards/Approvals	RoHS
	Height	1mm
	Series	FT4233HP
	Width	8.85 mm
	Length	8.85mm
	Automotive Standard	No
	Supply Current	0.87mA

	모두 선택
	브랜드 FTDI Chip
	Product Type Controller IC
	Number of Transceivers 4
	Maximum Data Rate 12Mbps
	Sub Type Controller
	USB Specification USB Type C
	Power Supply Type Single
	ESD Protection Yes
	Minimum Supply Voltage 3.3V
	Maximum Supply Voltage 1.32V
	Mount Type Surface
	Package Type QFN
	Pin Count 76
	Supported Protocols USB 2.0
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Standards/Approvals RoHS
	Height 1mm
	Series FT4233HP
	Width 8.85 mm
	Length 8.85mm
	Automotive Standard No
	Supply Current 0.87mA

The FTDI Chip FT4233HP/FT4232HP is a Hi-Speed USB device with a Type-C/PD3.0 controller that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 4 independent channels compatible with the existing FT4232H – Quad Hi-speed USB to multipurpose UART/MPSSE solution.

Supports PD Specification 3.0

2 x USB PD 3.0 Port Support. Port 1 supports Dual Role Swap Function while Port 2 supports sink mode with charging function through to Port 1

Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source

Type-C/PD Physical Layer Protocol

PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM

PD mode configuration through external EEPROM

Options to use external MCU controlling PD policy through I2C interface

Up to 8 Configurable PD GPIO pins support

External MCU support through I2C bus

External EEPROM support for USB device configuration and PD profile

FTDI Chip, Controller IC, 4-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 76-Pin QFN

관련된 링크들