제조사부품번호

FTDI Chip FT2232HPQ-TRAY, Controller IC, 2-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 68-Pin QFN

RS 제품 번호:: 228-3119
제조사 부품 번호:: FT2232HPQ-TRAY
제조업체:: FTDI Chip

FTDI Chip FT2232HPQ-TRAY, Controller IC, 2-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 68-Pin QFN

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩9,569.20

재고있음

667 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 9	₩9,569.20
10 - 99	₩9,381.20
100 +	₩9,174.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 228-3119
제조사 부품 번호:: FT2232HPQ-TRAY
제조업체:: FTDI Chip

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	FTDI Chip
	Maximum Data Rate	12Mbps
	Number of Transceivers	2
	Product Type	Controller IC
	Sub Type	Controller
	USB Specification	USB Type C
	Power Supply Type	Single
	ESD Protection	Yes
	Maximum Supply Voltage	1.32V
	Minimum Supply Voltage	3.3V
	Mount Type	Surface
	Package Type	QFN
	Pin Count	68
	Minimum Operating Temperature	-40°C
	Supported Protocols	USB 2.0
	Maximum Operating Temperature	85°C
	Height	0.9mm
	Length	8mm
	Standards/Approvals	RoHS
	Width	8 mm
	Series	FT2232HP
	Automotive Standard	No
	Supply Current	0.83mA

	모두 선택
	브랜드 FTDI Chip
	Maximum Data Rate 12Mbps
	Number of Transceivers 2
	Product Type Controller IC
	Sub Type Controller
	USB Specification USB Type C
	Power Supply Type Single
	ESD Protection Yes
	Maximum Supply Voltage 1.32V
	Minimum Supply Voltage 3.3V
	Mount Type Surface
	Package Type QFN
	Pin Count 68
	Minimum Operating Temperature -40°C
	Supported Protocols USB 2.0
	Maximum Operating Temperature 85°C
	Height 0.9mm
	Length 8mm
	Standards/Approvals RoHS
	Width 8 mm
	Series FT2232HP
	Automotive Standard No
	Supply Current 0.83mA

The FTDI Chip FT2233HP/FT2232HP is a Hi-Speed USB device with a Type-C/PD 3.0 controller that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 2 independent channels compatible with the FT2232H – Dual Hi-speed USB to multipurpose UART/MPSSE solution.

Supports PD Specification 3.0.

1 x USB PD 3.0 Port supports Dual Role Swap Function

Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source.

Type-C/PD Physical Layer Protocol.

PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM.

PD mode configuration through external EEPROM.

Options to use external MCU controlling PD policy through I2C interface.

Up to 8 Configurable PD GPIO pins support.

External MCU support through I2C bus

FTDI Chip FT2232HPQ-TRAY, Controller IC, 2-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 68-Pin QFN

관련된 링크들