제조사부품번호

FTDI Chip, Controller IC, 1-Channel 12 Mbps, 1.98 V, USB, 3.3 V, 48-Pin LQFP

RS 제품 번호:: 196-6445
제조사 부품 번호:: VNC2-48L1C-TRAY
제조업체:: FTDI Chip

FTDI Chip, Controller IC, 1-Channel 12 Mbps, 1.98 V, USB, 3.3 V, 48-Pin LQFP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 tray of 250 units)*

₩1,872,950.00

일시적 품절

2026년 7월 24일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	Per Tray*
250 - 1000	₩7,491.80	₩1,872,762.00
1250 +	₩7,341.40	₩1,835,256.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 196-6445
제조사 부품 번호:: VNC2-48L1C-TRAY
제조업체:: FTDI Chip

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	FTDI Chip
	Number of Transceivers	1
	Maximum Data Rate	12Mbps
	Product Type	Controller IC
	Sub Type	Controller
	USB Specification	USB 2.0
	Power Supply Type	Single
	ESD Protection	Yes
	Minimum Supply Voltage	3.3V
	Maximum Supply Voltage	1.98V
	Mount Type	Surface
	Package Type	LQFP
	Pin Count	48
	Supported Protocols	USB
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Length	7mm
	Width	7 mm
	Standards/Approvals	RoHS
	Height	1.45mm
	Series	VNC2
	Automotive Standard	No
	Supply Current	25mA

	모두 선택
	브랜드 FTDI Chip
	Number of Transceivers 1
	Maximum Data Rate 12Mbps
	Product Type Controller IC
	Sub Type Controller
	USB Specification USB 2.0
	Power Supply Type Single
	ESD Protection Yes
	Minimum Supply Voltage 3.3V
	Maximum Supply Voltage 1.98V
	Mount Type Surface
	Package Type LQFP
	Pin Count 48
	Supported Protocols USB
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Length 7mm
	Width 7 mm
	Standards/Approvals RoHS
	Height 1.45mm
	Series VNC2
	Automotive Standard No
	Supply Current 25mA

Datasheet VNC2-48L1C-TRAY

Dual USB 2.0 Host / Slave controller.

Embedded 16-bit Harvard architecture MCU core, with 256KBytes of Flash memory and 16Kbytes RAM.

2 x Full-Speed / Low-speed USB 2.0 ports supporting Host or Slave operation.

Programmable UART interface, supports up to 6MBaud transfers.

8-bit wide FIFO interface.

2 x SPI slave interfaces, 1 x SPI master interface.

PWM (Pulse Width Modulation) interface.

4 channel DMA controller, and general purpose timers.

Support for reduced power modes.

Two packages size options (32-/48-pin QFN and LQFP packages).

Backwards compatible with VNC1L with 48-pin LQFP package.

Extended temperature support (-40°C to +85°C).

Enhanced features with Vinculum Software Tool Suite

Based on royalty-free flexible ’C’ based Integrated Development Environment.

Includes compiler, drivers and RTOS kernel to support user firmware development.

Debug interface for real-time hardware based code debug.

Pre-compiled libraries for several USB classes including FAT file system support.

FTDI Chip, Controller IC, 1-Channel 12 Mbps, 1.98 V, USB, 3.3 V, 48-Pin LQFP

관련된 링크들