FTDI Chip VNC2-48L1C-REEL, USB Controller, 12Mbps, USB, 3.3 V, 48-Pin LQFP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 USB Interface ICs 열람하기
대량 구매 할인 기용 가능

Subtotal (1 reel of 1500 units)*

₩10,972,620.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 7월 03일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
릴당*
1500 - 6000₩7,315.08₩10,973,466.00
7500 +₩7,170.32₩10,754,070.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
196-6443
제조사 부품 번호:
VNC2-48L1C-REEL
제조업체:
FTDI Chip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

FTDI Chip

Number of Transceivers

1

Data Rate

12Mbps

IC Type

Controller IC

Protocols Supported

USB

Power Supply Type

Single

ESD Protection

Yes

Typical Single Supply Voltage

3.3 V

Mounting Type

Surface Mount

Package Type

LQFP

Pin Count

48

Dimensions

7 x 7 x 1.45mm

Height

1.45mm

Length

7mm

Maximum Operating Temperature

+85 °C

Width

7mm

Minimum Operating Temperature

-40 °C

Dual USB 2.0 Host / Slave controller.
Embedded 16-bit Harvard architecture MCU core, with 256KBytes of Flash memory and 16Kbytes RAM.
2 x Full-Speed / Low-speed USB 2.0 ports supporting Host or Slave operation.
Programmable UART interface, supports up to 6MBaud transfers.
8-bit wide FIFO interface.
2 x SPI slave interfaces, 1 x SPI master interface.
PWM (Pulse Width Modulation) interface.
4 channel DMA controller, and general purpose timers.
Support for reduced power modes.
Two packages size options (32-/48-pin QFN and LQFP packages).
Backwards compatible with VNC1L with 48-pin LQFP package.
Extended temperature support (-40°C to +85°C).
Enhanced features with Vinculum Software Tool Suite
Based on royalty-free flexible ’C’ based Integrated Development Environment.
Includes compiler, drivers and RTOS kernel to support user firmware development.
Debug interface for real-time hardware based code debug.
Pre-compiled libraries for several USB classes including FAT file system support.

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들