제조사부품번호

FTDI Chip, USB Bridge IC, 2-Channel 5 Gbps, 3.6 V, USB 3.0, USB 2.0, 3.3 V, 76-Pin QFN

RS 제품 번호:: 146-6836
Distrelec 제품 번호:: 303-96-568
제조사 부품 번호:: FT601Q-B-T
제조업체:: FTDI Chip

FTDI Chip, USB Bridge IC, 2-Channel 5 Gbps, 3.6 V, USB 3.0, USB 2.0, 3.3 V, 76-Pin QFN

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 tray of 260 units)*

₩3,718,790.40

재고있음

260 개 단위 배송 준비 완료
추가로 다른 지역에서 260 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	Per Tray*
260 - 260	₩14,303.04	₩3,718,790.40
520 - 780	₩14,017.28	₩3,644,395.04
1040 +	₩13,737.16	₩3,571,514.96

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 146-6836
Distrelec 제품 번호:: 303-96-568
제조사 부품 번호:: FT601Q-B-T
제조업체:: FTDI Chip

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	FTDI Chip
	Maximum Data Rate	5Gbps
	Product Type	USB Bridge IC
	Number of Transceivers	2
	USB Specification	USB 2.0, USB 3.0
	Sub Type	Transceiver
	Power Supply Type	Single
	ESD Protection	Yes
	Maximum Supply Voltage	3.6V
	Minimum Supply Voltage	3.3V
	Mount Type	Surface
	Package Type	QFN
	Pin Count	76
	Supported Protocols	USB 3.0, USB 2.0
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Length	9.1mm
	Height	0.95mm
	Standards/Approvals	RoHS
	Width	9.1 mm
	Series	FT601Q
	Automotive Standard	No
	Supply Current	70mA

	모두 선택
	브랜드 FTDI Chip
	Maximum Data Rate 5Gbps
	Product Type USB Bridge IC
	Number of Transceivers 2
	USB Specification USB 2.0, USB 3.0
	Sub Type Transceiver
	Power Supply Type Single
	ESD Protection Yes
	Maximum Supply Voltage 3.6V
	Minimum Supply Voltage 3.3V
	Mount Type Surface
	Package Type QFN
	Pin Count 76
	Supported Protocols USB 3.0, USB 2.0
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Length 9.1mm
	Height 0.95mm
	Standards/Approvals RoHS
	Width 9.1 mm
	Series FT601Q
	Automotive Standard No
	Supply Current 70mA

Enabling Faster and higher volume data transfers than ever before, the FT600 and FT601 Super Speed USB3.0 ICs offer USB access to a wider range of data intensive imaging and data acquisition applications. The series incorporates two vendor class USB devices supported by our D3xx driver. The FT600 and FT601 function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth. devices - the FT600 and FT601, which function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth.

16bit/32bit wide parallel FIFO interface.

Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.

Supports multi channel FIFO interface.

Up to 8 configurable endpoints (pipes).

Built-in 16kB FIFO data buffer RAM.

Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.

Configurable GPIO support.

Supports Remote Wakeup capability.

Provides USB Battery Charger Detection.

Integrated power-on-reset circuit.

FTDI Chip, USB Bridge IC, 2-Channel 5 Gbps, 3.6 V, USB 3.0, USB 2.0, 3.3 V, 76-Pin QFN

관련된 링크들