FTDI Chip FT600Q-B-T, USB Bridge IC, 2-Channel, 480 Mbps, 5Gbit/s, USB 2.0, USB 3.0, 3.3 V, 56-Pin QFN

모든 USB Interface ICs 열람하기
대량 구매 할인 기용 가능

Subtotal (1 tray of 260 units)*

₩3,428,932.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 520 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
Per Tray*
260 - 260₩13,188.20₩3,428,834.24
520 - 780₩12,923.12₩3,360,255.60
1040 +₩12,665.56₩3,293,045.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
146-6835
제조사 부품 번호:
FT600Q-B-T
제조업체:
FTDI Chip
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

FTDI Chip

Number of Transceivers

2

Data Rate

480 Mbps, 5Gbit/s

Protocols Supported

USB 2.0, USB 3.0

IC Type

Transceiver IC

Power Supply Type

Single

ESD Protection

Yes

Typical Single Supply Voltage

3.3 V

Mounting Type

Surface Mount

Package Type

QFN

Pin Count

56

Dimensions

7.1 x 7.1 x 0.69mm

Height

0.69mm

Length

7.1mm

Maximum Operating Temperature

+85 °C

Minimum Operating Temperature

-40 °C

Width

7.1mm

Enabling faster and higher volume data transfers than ever before, the FT600 and FT601 Super Speed USB3.0 ICs offer USB access to a wider range of data intensive imaging and data acquisition applications. The series incorporates two vendor class USB devices supported by our D3xx driver. The FT600 and FT601 function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth. devices - the FT600 and FT601, which function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth.

16bit/32bit wide parallel FIFO interface.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들