FTDI Chip 1-Channel UART SIE, RS485, RS422, UART, RS232 20-Pin SSOP
- RS 제품 번호:
- 757-0032P
- 제조사 부품 번호:
- FT231XS-R
- 제조업체:
- FTDI Chip
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal 500 units (supplied on a reel)*
₩1,701,400.00
일시적 품절
- 2026년 4월 22일 부터 1,976 개 단위 배송
- 추가로 2026년 6월 17일 부터 2,000 개 단위 배송
- 추가로 2026년 11월 04일 부터 2,000 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 500 - 2498 | ₩3,402.80 |
| 2500 + | ₩3,337.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 757-0032P
- 제조사 부품 번호:
- FT231XS-R
- 제조업체:
- FTDI Chip
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | FTDI Chip | |
| Product Type | UART | |
| Number of Channels | 1 | |
| Standard Supported | SIE, RS485, RS422, UART, RS232 | |
| Transmit FIFO | 512bit | |
| Receive FIFO | 512bit | |
| Maximum Data Rate | 3MBd | |
| Mount Type | Surface | |
| Package Type | SSOP | |
| Pin Count | 20 | |
| Minimum Supply Voltage | 1.8V | |
| Maximum Supply Voltage | 3.3V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Height | 1.76mm | |
| Series | FT231X | |
| Standards/Approvals | No | |
| Length | 8.73mm | |
| Width | 6.19 mm | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 FTDI Chip | ||
Product Type UART | ||
Number of Channels 1 | ||
Standard Supported SIE, RS485, RS422, UART, RS232 | ||
Transmit FIFO 512bit | ||
Receive FIFO 512bit | ||
Maximum Data Rate 3MBd | ||
Mount Type Surface | ||
Package Type SSOP | ||
Pin Count 20 | ||
Minimum Supply Voltage 1.8V | ||
Maximum Supply Voltage 3.3V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Height 1.76mm | ||
Series FT231X | ||
Standards/Approvals No | ||
Length 8.73mm | ||
Width 6.19 mm | ||
Automotive Standard No | ||
FT230X, FT231X, FT234XD - Full Speed USB to UART, FTDI Chip
The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface.
They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count.
Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They use as little bandwidth as possible.
The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.
- Fully integrated MTP memory, clock generation, AVCC filtering, Power-On Reset (POR) and LDO regulators.
- Configurable CBUS I/O Pin Options.
- Asynchronous and Synchronous Bit Bang Modes.
- Operates at between +3.3 V and +5.25 V. A nominal operational mode current of 8 mA and a nominal USB suspend mode current of 125 μA.
관련된 링크들
- FTDI Chip UART RS232, RS422, RS485, SIE, UART 20-Pin SSOP, FT231XS-R
- FTDI Chip UART RS232, RS422, RS485, SIE, UART 16-Pin SSOP, FT230XS-R
- FTDI Chip UART RS232, RS422, RS485, SIE, UART 16-Pin QFN, FT230XQ-R
- FTDI Chip UART SIE, UART 16-Pin SSOP, FT201XS-R
- FTDI Chip UART SIE, UART 16-Pin SSOP, FT220XS-R
- FTDI Chip Dual-Channel UART RS232, RS422, RS485 64-Pin LQFP, FT2232HL-REEL
- FTDI Chip UART SIE, UART 10-Pin DFN, FT200XD-R
- FTDI Chip UART SIE 24-Pin QFN, FT240XQ-R
