제조사부품번호

Nexperia 2-Element Uni-Directional ESD Protection Diode, 5-Pin WLCSP

RS 제품 번호:: 153-0754
제조사 부품 번호:: PESD1USB3SZ
제조업체:: Nexperia

Nexperia 2-Element Uni-Directional ESD Protection Diode, 5-Pin WLCSP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 reel of 4500 units)*

₩1,336,680.00

일시적 품절

2026년 9월 10일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	릴당*
4500 - 4500	₩297.04	₩1,338,372.00
9000 - 40500	₩291.40	₩1,311,300.00
45000 +	₩285.76	₩1,285,074.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 153-0754
제조사 부품 번호:: PESD1USB3SZ
제조업체:: Nexperia

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Nexperia
	Product Type	ESD Protection Diode
	Direction Type	Uni-Directional
	Minimum Breakdown Voltage Vbr	6V
	Mount Type	Surface
	Package Type	WLCSP
	Pin Count	5
	Minimum Operating Temperature	-40°C
	Maximum Peak Pulse Current Ippm	8A
	ESD Protection	Yes
	Number of Elements per Chip	2
	Maximum Operating Temperature	85°C
	Standards/Approvals	IEC 61000-4-2
	Width	0.82 mm
	Series	PESD
	Length	1.22mm
	Height	0.38mm
	Maximum Reverse Leakage Current	100nA
	Automotive Standard	AEC-Q101

	모두 선택
	브랜드 Nexperia
	Product Type ESD Protection Diode
	Direction Type Uni-Directional
	Minimum Breakdown Voltage Vbr 6V
	Mount Type Surface
	Package Type WLCSP
	Pin Count 5
	Minimum Operating Temperature -40°C
	Maximum Peak Pulse Current Ippm 8A
	ESD Protection Yes
	Number of Elements per Chip 2
	Maximum Operating Temperature 85°C
	Standards/Approvals IEC 61000-4-2
	Width 0.82 mm
	Series PESD
	Length 1.22mm
	Height 0.38mm
	Maximum Reverse Leakage Current 100nA
	Automotive Standard AEC-Q101

Common Mode filter for USB ports, No room for compromise, The most common Camera and display Interface used now for portable devices is the differential MIPI Interface running at RF frequencies. To allow operation at typical GSM/3G/LTE frequencies, a strong common-mode suppression over all bands and higher harmonics is needed. At the same time, a wide differential passband is needed to keep signal integrity. Since ESD can enter through gaps in the portable device, strong ESD protection is needed to avoid damage of the electronics or re-setting the system due to ESD strikes

Strong common-mode suppression > 14 dB in the range between 500 MHz and > 8 GHz

Wide passband > 2 GHz, ensuring signal integrity for all MIPI frequencies

ESD ruggedness > 15 kV contact, far exceeding IEC 61000-4-2 (8 kV contact)

Deep snap-back for optimized SoC protection against ESD strikes

Very thin package (0.5 mm max package height)

All LVDS signals needing a passband up to 2 GHz

Nexperia 2-Element Uni-Directional ESD Protection Diode, 5-Pin WLCSP

관련된 링크들