제조사부품번호

MHH Engineering Dial Measuring Torque Screwdriver, 1 To 5 Nm, 1/4 in Drive, ±6 % Accuracy

RS 제품 번호:: 667-5060
제조사 부품 번호:: 3498867
제조업체:: MHH Engineering

MHH Engineering Dial Measuring Torque Screwdriver, 1 To 5 Nm, 1/4 in Drive, ±6 % Accuracy

Subtotal (1 unit)*

₩420,010.80

일시적 품절

2026년 2월 23일 부터 12 개 단위 배송
추가로 2026년 5월 04일 부터 6 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩420,010.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 667-5060
제조사 부품 번호:: 3498867
제조업체:: MHH Engineering

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	MHH Engineering
	Product Type	Torque Screwdriver
	Torque Range	1 To 5 Nm
	Sub Type	Dial Measuring
	Drive Size	1/4 in
	Overall Length	250mm
	Accuracy	±6 %
	Blade Material	Stainless Steel
	Standards/Approvals	ISO 6789:2003

	모두 선택
	브랜드 MHH Engineering
	Product Type Torque Screwdriver
	Torque Range 1 To 5 Nm
	Sub Type Dial Measuring
	Drive Size 1/4 in
	Overall Length 250mm
	Accuracy ±6 %
	Blade Material Stainless Steel
	Standards/Approvals ISO 6789:2003

TT Dial Measuring Screwdrivers Data Sheet

COO (Country of Origin):: GB

Dial Measuring Drivers

Stainless steel shafts, aluminium handles and glass filled nylon dials

Flat torsion spring mechanism gives best linear characteristics in both directions

Feature dual ISO / Imperial dials

¼" Female Hexagon Drive to suit screwdriver bits

Can be used in either track mode, where the pointer tracks the applied torque, or in memory mode, where the pointer remains at the maximum torque applied

Mode is easily changed by withdrawing slider and resetting the bezel ring

Suitable for Quality Control and Research and Development, also assembly operations for example electronics, electrical etc.

Note

These Drivers must be pre-set using a suitable Torque Analyser. See Analyser range for details.

MHH Engineering Dial Measuring Torque Screwdriver, 1 To 5 Nm, 1/4 in Drive, ±6 % Accuracy

Dial Measuring Drivers

Note

관련된 링크들