Jumo Capillary Thermostat, 110 °C Max, Automatic Reset, 10 A, Surface Mount
- RS 제품 번호:
- 278-906
- 제조사 부품 번호:
- 603021/70-1-052-00-0-00-20-13-46-200-8-6/000
- 제조업체:
- Jumo
Subtotal (1 unit)*
₩794,460.00
제조사가 재고 비축중
- 2026년 12월 07일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩794,460.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 278-906
- 제조사 부품 번호:
- 603021/70-1-052-00-0-00-20-13-46-200-8-6/000
- 제조업체:
- Jumo
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Jumo | |
| Minimum Operating Temperature | 30°C | |
| Product Type | Thermostat | |
| Maximum Operating Temperature | 110°C | |
| Thermostat Type | Capillary | |
| Contact AC Voltage | 230V ac | |
| Terminal Type | Twin-Purpose Terminal | |
| Contact DC Voltage | 60V dc | |
| Contact Current | 10A | |
| Hazardous Area Certification | EN, IEC | |
| Series | 602031 | |
| Standards/Approvals | EAC, DGRL, RoHS, DIN EN 14597 | |
| Mount Type | Surface Mount | |
| Reset Type | Automatic | |
| 모두 선택 | ||
|---|---|---|
브랜드 Jumo | ||
Minimum Operating Temperature 30°C | ||
Product Type Thermostat | ||
Maximum Operating Temperature 110°C | ||
Thermostat Type Capillary | ||
Contact AC Voltage 230V ac | ||
Terminal Type Twin-Purpose Terminal | ||
Contact DC Voltage 60V dc | ||
Contact Current 10A | ||
Hazardous Area Certification EN, IEC | ||
Series 602031 | ||
Standards/Approvals EAC, DGRL, RoHS, DIN EN 14597 | ||
Mount Type Surface Mount | ||
Reset Type Automatic | ||
- COO (Country of Origin):
- DE
The Jumo 1 Pole Mechanical Surface Mounting Thermostat is very robust and can also be used in rough conditions. The measuring system used operates on the fluid expansion principle and can be used without any problems up to a maximum permissible probe temperature of 135°C. A decisive advantage is that no additional auxiliary energy is necessary for temperature measurement. The electrical connection is made directly to the installed microswitch via screw terminals, which can directly switch a maximum permissible switching capacity of AC 230 V / 10 A. The safety temperature limiter can be used very flexibly and is used in heating, air conditioning and ventilation technology as well as in the plastics industry, in apparatus and mechanical engineering and in furnace construction, in district heating transfer stations and for temperature monitoring in laboratories and climatic chambers.
Shock resistant case with high quality plastic cover
Aluminium die cast lower part
Approved according to DIN EN 14597 and an EAC approval
nickel plated brass protection tube with 8 mm diameter and G 1/2 thread
Max ambient temperature is 80°C (IP54 protection)
switch off temperature adjustable via screwdriver after removing case lid
Circuit opens and signal contact closes if temperature exceeds set limit
Micro switch locked when temperature exceeds set value
Micro switch unlocks after temperature drops 10% below scale range
Switching accuracy is +0/-5% in upper third of scale
Circuit permanently opens if measuring system is damaged
관련된 링크들
- Jumo Capillary Thermostat, 110 °C Max, Automatic Reset, 10 A, Surface Mount
- Jumo Capillary Thermostat, 110 °C Max Additional Signal Contact, Restart Lock, Changeover Contact, Automatic Reset, 1
- Jumo Capillary Thermostat, 110 °C Max B Tripping Characteristic, Automatic Reset, 10 A, Surface Mount
- Jumo Capillary Thermostat, Closes at 75 °C, 110 °C Max Faz Miniature Circuit Breaker, Automatic Reset, 10 A, Surface
- Jumo Capillary Thermostat, 110 °C Max, Automatic Reset, Panel Mount
- Jumo Capillary Thermostat, 130 °C Max, Automatic Reset, 10 A, Surface Mount
- Jumo Capillary Thermostat, 75 °C Max, Automatic Reset, 10 A, Surface Mount
- Jumo Capillary Thermostat, 110 °C Max, Automatic Reset, NC, 10 A, Surface Mount
