Jumo Capillary Thermostat, 110 °C Max, Automatic Reset, 10 A, Surface Mount

Subtotal (1 unit)*

₩771,620.00

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 12월 07일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩771,620.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
278-901
제조사 부품 번호:
603021/70-2-052-00-2000-40-10-00-00-000-00-6 000
제조업체:
Jumo
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Jumo

Minimum Operating Temperature

30°C

Product Type

Thermostat

Maximum Operating Temperature

110°C

Thermostat Type

Capillary

Contact AC Voltage

230V ac

Terminal Type

Twin-Purpose Terminal

Contact Current

10A

Contact DC Voltage

60V dc

Series

603021

Hazardous Area Certification

No

Standards/Approvals

DIN EN 14597, EAC, RoHS, DGRL

Mount Type

Surface Mount

Reset Type

Automatic

COO (Country of Origin):
DE
The Jumo 1 Pole Mechanical Surface Mounting Thermostat is very robust and can also be used in rough conditions. The measuring system used operates on the fluid expansion principle and can be used without any problems up to a maximum permissible probe temperature of 135°C. A decisive advantage is that no additional auxiliary energy is necessary for temperature measurement. The electrical connection is made directly to the installed microswitch via screw terminals, which can directly switch a maximum permissible switching capacity of AC 230 V / 10 A. The safety temperature limiter can be used very flexibly and is used in heating, air conditioning and ventilation technology as well as in the plastics industry, in apparatus and mechanical engineering and in furnace construction, in district heating transfer stations and for temperature monitoring in laboratories and climatic chambers.

Shock resistant case with high quality plastic cover

Aluminium die cast lower part

Approved according to DIN EN 14597 and an EAC approval

Copper sensor with a 6 mm diameter and 108 mm probe length

Capillary made of copper with a 5 mm bending radius

Max ambient temperature 80 °C

Set switch off temperature using a screwdriver after removing the case lid

Circuit opens and signal contact closes when the temperature exceeds set limit

Micro switch locks and can be manually unlocked once temperature falls below 10% of the scale

High switching point accuracy of +0/-5% in the upper third of the scale

Switching contact remains in a neutral position so no contacts are switched

Circuit opens when temperature drops below -20 °C and can be reset above -20 °C

관련된 링크들