Electrolube Metal Oxide Thermal Adhesive, 1.8 W/mK

모든 Thermal Grease 열람하기

Subtotal (1 unit)*

₩155,532.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 997 개 단위 배송 준비 완료
  • 추가로 2026년 5월 14일 부터 173 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩155,532.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
725-9975
Distrelec 제품 번호:
175-59-893
제조사 부품 번호:
TCOR75S
제조업체:
Electrolube
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Electrolube

Product Type

Thermal Adhesive

Thermal Conductivity

1.8W/mK

Physical State

Paste

Package Size

75 ml

Standards/Approvals

RoHS

Minimum Operating Temperature

-50°C

Maximum Operating Temperature

230°C

Chemical Component

Metal Oxide

COO (Country of Origin):
CN

Electrolube Thermally Conductive RTV (Oxime)


Introducing the thermally conductive Oxime adhesive from Electrolube, a single component low odour RTV (room temperature vulcanising) adhesive, ideal for bonding electrical components and heatsinks. This thermally conductive oxime has been designed to fill the gap between device and heat sink, reducing the thermal resistance. This reliable adhesive is perfect for dissipating excess heat from components and power resistors to heatsinks, preventing potential overheating or failures. In addition, this versatile sealant can be used as a low bond strength adhesive or gasket compound.

This single component metal oxime adhesive is perfect for use with the Electrolube application gun: 725-9984

Features and benefits


• Wide operating range of -50°C to +230°C, making it ideal for use with a variety of applications

• Excellent bond and adhesion strength, eliminating the need for welding techniques

• Excellent thermal conductivity even at high temperatures

• Stronger bond strength than standard RTV's making it a very versatile adhesive

• 1-part metal oxime adhesive that is ready and easy to use

• Perfect for use with the Electrolube application gun (725-9984)

Application


Thermal adhesives are a type of thermally conductive adhesive used to secure heat sinks and electronic components. Thermal adhesives are available in a number of mediums such as thermal paste, glue, tape and more. They work by creating a strong bond for heatsinks or electrical parts commonly via a two-part epoxy resin with thermal conductivity capabilities, drawing heat away from a device. Thermal adhesives are used in a variety of industries and applications such as:

• Heat sink bonding

• Potting/encapsulating sensors

• BGA die heat spreader interface

• Chip scale packages

• Power semiconductors

How to apply


Before applying, ensure surfaces are clean and free from grease, dust and contaminants. Insert the adhesive tube into the Electrolube application gun (stock no: 725-9984), which dispenses the product, providing efficient and accurate dispensing. Apply a thin layer of the adhesive to the components required for bonding, before leaving the product to cure for the recommended time of 24 hours as 20°C.

Note: Curing rate is dependent upon ambient conditions of temperature and humidity.

Can this thermal adhesive be removed?


Thermal adhesives such as grease and pastes can be removed if required using a combination of a thermal adhesive remover (or high concentrate rubbing alcohol) and a lint free micro fibre cloth. Please note special care must be taken when removing thermal compounds and protective clothing must be worn at all times.

What is the maximum operating temperature?


The maximum operating temperature of this thermally conductive sealant is +250°C.

Standards

RoHS Compliant (2002/95/EC)

관련된 링크들