RS PRO Metal Oxide, Silicone Oil Thermal Grease, 2.9 W/mK, Tube
- RS 제품 번호:
- 217-3835
- 제조업체:
- RS PRO
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩36,231.00
재고있음
- 14 개 단위 배송 준비 완료
- 추가로 다른 지역에서 326 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩36,231.00 |
| 5 - 24 | ₩35,470.50 |
| 25 + | ₩29,191.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 217-3835
- 제조업체:
- RS PRO
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | RS PRO | |
| Thermal Conductivity | 2.9W/mK | |
| Product Type | Thermal Grease | |
| Package Size | 20 ml | |
| Physical State | Paste | |
| Dispensing Method | Tube | |
| Standards/Approvals | RoHS | |
| Chemical Component | Metal Oxide, Silicone Oil | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 200°C | |
| 모두 선택 | ||
|---|---|---|
브랜드 RS PRO | ||
Thermal Conductivity 2.9W/mK | ||
Product Type Thermal Grease | ||
Package Size 20 ml | ||
Physical State Paste | ||
Dispensing Method Tube | ||
Standards/Approvals RoHS | ||
Chemical Component Metal Oxide, Silicone Oil | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 200°C | ||
- COO (Country of Origin):
- GB
RS PRO SMT Silicone Heat Compound Paste
This general purpose heat sink silicone grease from RS Pro can be used across a number of applications and within a wide operating temperature range.
The compound is made up of metal oxide and silicone oil and is thermally conductive. The thermal paste works by filling in all those minuscule imperfections, which could otherwise trap tiny air particles in between the CPU and heat-sink and therefore prevent the CPU from cooling properly.
Features and Benefits
• 20 ml tube
• Superior thermal conductivity even at high temperatures
• Excellent non-creep characteristics
• Safe and easy to use
• 4 years shelf life
How do I use silicone grease?
Apply a thin layer of the grease onto the contact surface. Ensure that the entire interface is covered which will prevent hot-spots. Remove any excess paste squeezed out after mounting has taken place. Best results are achieved when a thin coat in applied between the mating surfaces.