제조사부품번호

Pomona Black, Red Test Connector Adapter With Brass contacts and Nickel Plated

RS 제품 번호:: 221-8214
Distrelec 제품 번호:: 146-65-113
제조사 부품 번호:: 1452
제조업체:: Pomona

Pomona Black, Red Test Connector Adapter With Brass contacts and Nickel Plated

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 unit)*

₩43,060.00

76 개 단위 배송 준비 완료
추가로 2026년 10월 09일 부터 16 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 4	₩43,060.00
5 +	₩42,200.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 221-8214
Distrelec 제품 번호:: 146-65-113
제조사 부품 번호:: 1452
제조업체:: Pomona

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Pomona
	Colour	Black, Red
	Product Type	Test Connector Adapter
	Connector Gender B	Male
	Contact Material	Brass
	Contact Plating	Nickel
	Voltage	500Vrms
	Connector Type A	Binding Post
	Connector Type B	BNC Receptacle
	Standards/Approvals	No

	모두 선택
	브랜드 Pomona
	Colour Black, Red
	Product Type Test Connector Adapter
	Connector Gender B Male
	Contact Material Brass
	Contact Plating Nickel
	Voltage 500Vrms
	Connector Type A Binding Post
	Connector Type B BNC Receptacle
	Standards/Approvals No

Datasheet - 1452

COO (Country of Origin):: US

Fluke Test Connector Adapter, 500Vrms Voltage, Black - 1452

This test connector adapter converts binding-post connections to a BNC receptacle for use in laboratory and field test environments. It allows banana-plug-equipped leads to mate with equipment that accepts a male BNC, and is specified for hand-held and controlled hands-free voltage conditions.

Features and Benefits:

• 500Vrms rating permits controlled hands-free high-voltage testing
• 50Ω nominal impedance supports consistent signal integrity
• Nickel-plated brass contacts resist corrosion during repeated use
• Dual-colour insulated posts enable clear polarity identification
• ABS-moulded insulation tolerates elevated temperatures

Applications

• Suitable for connecting banana-plug leads to BNC equipment
• Ideal for bench-top measurement setups requiring 50Ω termination
• Used with handheld probes under low-voltage conditions
• Can be used for controlled-voltage hands-free test arrangements
• Used for Rapid side stack-up connections via cross holes

What maximum voltage is permitted for handheld testing?

For hand-held measurements the adapter is rated to 30VAC/60VDC maximum.

How are polarity and earthing identified on the connector?

One insulated binding post is red and the other is black to designate polarity and earth/ground.

What materials comprise the conductive parts and protective finish?

Conductive bodies are brass with a nickel plating applied to contact surfaces.

How does the adapter handle thermal conditions during use?

The insulation is ABS moulding specified for operation up to +115°C maximum.

What impedance should test instruments expect when using this adapter?

Instruments should see a nominal impedance of 50 ohms when connected.