PR Electronics PT100 Input 30V

RS 제품 번호:: 175-6341
제조사 부품 번호:: 5437D2
제조업체:: PR Electronics

Subtotal (1 unit)*

₩1,076,356.40

일시적 품절

2026년 3월 30일 부터 2 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩1,076,356.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 175-6341
제조사 부품 번호:: 5437D2
제조업체:: PR Electronics

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	PR Electronics
	Input Type	PT100
	Maximum Supply Voltage	30V

	모두 선택
	브랜드 PR Electronics
	Input Type PT100
	Maximum Supply Voltage 30V

COO (Country of Origin):: DK

5437D2

The 5437D can be mounted in zone 0, 1, 2 and zone 20, 21, 22 including M1 / Class I, Division 1, Groups A, B, C, D.

5437 HART 7 Dual Input Temperature Transmitter

PR Electronics 5437 dual input temperature transmitter offers unrivalled performance in the most demanding of applications to convert a wide array of input types to a 4 – 20 mA output signal. The transmitter has 7 input terminals measuring one or two sensors, including two 4-wire RTDs, with individual sensor error detection. Configuring the transmitter with either HART 7 or HART 5 protocols provide flexibility and future proof communication.

Sensor Inputs

The PR 5437 provides unrivalled dual input versatility. Virtually any thermocouple or RTD plus linear resistance up to 100 kΩ, potentiometer, and bipolar mV signals. Input sensor redundancy function maintains process availability and safety by seamlessly switching to backup sensor in the event of primary sensor failure. An alert via HART can be used to allow scheduling of maintenance on the faulty sensor.

Installation Characteristics

Wiring - Innovative housing design means the 5437 temperature transmitter can be wired from either the inside or the outside of the terminals.

1/4” centre hole – A large diameter centre hole for easier installation over a wide range of probe mounting diameters.

Loop test pins - Accessible test pins allow measurement of loop current directly while maintaining loop integrity.

Status LED - On-board LED indicates faults according to NAMUR NE44 and NE107.

Jumper pins - Jumpers allow selection of write protection and transmitter burnout options.

Features and Benefits

• LED provides visual notification of sensor, transmitter, and loop status

• HART 7 and HART 5 communication protocols

• Sensor redundancy function switches to backup sensor in the event of sensor failure

• Sensor drift detection maintains measuring point reliability

• Flexible dual input capability, with choice of output modes

• Superior accuracy ensures true, reliable measurements

• Fast response time easily supports safety and cost-critical applications

• Very low temperature coefficient ensuring maximum accuracy across changing ambient conditions

• High galvanic isolation (2.5 kVAC / 55 VAC) providing protection from ground loops, high voltage transients and common mode interference

• Runtime meters provide a valuable history of the process temperature and the ambient temperature around the transmitter