Honeywell HIH-4000 Series Humidity Sensor, Analogue Output, Through Hole Mount, Analogue, ±3.5%RH, 3 Pins

RS 제품 번호:: 874-4562
제조사 부품 번호:: HIH-4000-004
제조업체:: Honeywell

Honeywell HIH-4000 Series Humidity Sensor, Analogue Output, Through Hole Mount, Analogue, ±3.5%RH, 3 Pins

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩101,520.00

제한된 재고

105 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 4	₩101,520.00
5 +	₩83,547.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 874-4562
제조사 부품 번호:: HIH-4000-004
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Sensor Function	Humidity Sensor
	Output Type	Analogue
	Interface Type	Analogue
	Accuracy	±3.5%RH
	Mounting Type	Through Hole
	Pin Count	3
	Minimum Operating Temperature	-40 °C
	Operating Temperature Range	-40 → +85 °C
	Maximum Operating Temperature	+85 °C
	Minimum Operating Supply Voltage	4 V
	Maximum Operating Supply Voltage	5.8 V
	Package Type	SIP
	Length	4.17mm
	Height	8.59mm
	Series	HIH-4000
	Width	2.03mm
	Sensor Gain	-4mV/°C
	Dimensions	4.17 x 2.03 x 8.59mm

	모두 선택
	브랜드 Honeywell
	Sensor Function Humidity Sensor
	Output Type Analogue
	Interface Type Analogue
	Accuracy ±3.5%RH
	Mounting Type Through Hole
	Pin Count 3
	Minimum Operating Temperature -40 °C
	Operating Temperature Range -40 → +85 °C
	Maximum Operating Temperature +85 °C
	Minimum Operating Supply Voltage 4 V
	Maximum Operating Supply Voltage 5.8 V
	Package Type SIP
	Length 4.17mm
	Height 8.59mm
	Series HIH-4000
	Width 2.03mm
	Sensor Gain -4mV/°C
	Dimensions 4.17 x 2.03 x 8.59mm

HIH-4000/4020/4021 Series Humidity Sensors, Honeywell

The HIH-4000 series has been specifically designed for use in high volume OEM (Original Equipment Manufacturer) applications. These sensors utilise a near linear voltage output making direct input to a controller or other devices possible. They are ideally suited for low drain, battery operated systems with a typical current draw of only 200 μA. Potential Applications:Refrigeration equipmentHVAC equipmentMedical equipmentDryingMeteorologyBattery-powered systemsOEM assemblies

Features:Moulded thermoset plastic housingNear linear voltage output vs %RHLaser-trimmed interchangeabilityEnhanced accuracy, fast responseFast response timeStable, low drift performanceChemically resistant

Honeywell Humidity Sensor, 3 Pin, 5.8V - HIH-4000 Series - HIH-4000-004

This humidity sensor from Honeywell uses a clever SIP (system-in-package) design to keep it compact. Its small size of 4.17 (length) by 2.03mm (width) means it fits in where space is tight. The sensor is a highly efficient and accurate component. It's laser-trimmed and uses a capacitive sensing element and integrated signal conditioning for a quick and reliable response. The linear voltage output draws a current of just 200μA (microamps), making it a low-power component that's well-suited to battery-operated devices. This humidity sensor has a moulded and layered thermoset plastic case to make it chemical, oil and dust resistant for a long service life.

Features & Benefits

• Through-hole mounting for quick and secure installation on PCBs (printed circuit boards)
• Wide operating temperature range of -40°C to +85°C for use in extreme conditions or outdoors
• Works with supply voltages between 4 and 5.8V for greater flexibility

Applications

• OEM (original equipment manufacturer) assemblies
• Refrigeration and HVAC (heating, ventilation and air conditioning) equipment
• Measurement and control systems

What conditions is this sensor calibrated to?

This device is calibrated at 5V DC and +25ºC, ready for immediate installation in your controller or device under normal conditions.

Temperature & Humidity Sensors, Honeywell