Eurotherm EPack DIN Rail Controller Voltage 500V ac/dc Open-Loop Control with Feedforward+Trim, Threshold Limit Control

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

Subtotal (1 unit)*

₩2,092,392.90

Add to Basket
수량 선택 또는 입력
제조사가 재고 비축중
  • 2026년 6월 15일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩2,092,392.90

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
790-3612
제조사 부품 번호:
EPACK-1PH/63A/24V/XXX/V2
제조업체:
Eurotherm
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Eurotherm

Product Type

Controller

Output Type

Voltage

Maximum Current

63A

Maximum Operating Temperature

45°C

Minimum Operating Temperature

0°C

Terminal Type

Plug

Control Type

Open-Loop Control with Feedforward+Trim, Threshold Limit Control (Pa Reduction), I² Control, V² Control, True Power Control, Proportional Limit Control (by transfer V²↔I² or P↔I²)

Maximum Supply Voltage

500V ac/dc

Diagnostics

Comms Network Fault, Open Thyristor Detection, Partial Load Failure, Over Current, Under/Over Voltage, Chop Off, Short Circuit Thyristor Detection

Digital Comms

Ethernet Dual Port/Modbus TCP

Firing Mode

Intelligent Half Cycle, Fixed Burst Firing, Phase Angle, Variable Burst Firing

Auxiliary Power Supply

100 to 500 V

Energy measurement

Yes

Display Type

1.5 in TFT Colour

Maximum Voltage

500V

IP Rating

IP10, IP20

Width

121mm

Length

48mm

Standards/Approvals

CE, GOST-R, UL, CCC, IEC 60947-4-3, cUL

Mount Type

DIN Rail

Series

EPack

Input Type

4 to 20 mA, Digital Input, 0 to 10 V, 2 to 10 V, 0 to 20 mA, One Configurable Analogue Input 0 to 5 V, Contact

Panel Depth

136.2mm

비준수

COO (Country of Origin):
PL

EPack - Compact SCR Power Controller


EPack power controller is a compact fully featured power controller, combining a high level of functionality and configurability with simplicity of setup and operation. The combination of advanced configurable firing modes allows close matching to load characteristics for maximum process efficiency. EPack is highly configurable and may be adapted for current and future needs using a software key to purchase additional functionality when needed.

Nominal load current from 32A (Stock-no.: 790-3619 & 800-6716) and 63A (Stock-no.: 790-3612 & 800-6725)

24V & 500V versions available

Analogue input signal (voltage and current)

High definition 1.5" TFT display

Configurable via iTools (PC software) or front panel

V2, I2 or true power control

Energy usage measurement

Advanced load diagnostics

Integrated dual port Ethernet switch for “daisy chained” communications

Plug and play Ethernet communications with Zero configuration networking

Modbus® TCP protocol

Compact DIN Rail and bulkhead Mounting Format

관련된 링크들